Part Number: DLPLCRC410EVM Hello,
My customer wants to know the part number of the flex cable used for connecting DLPLCR410EVM and DLPCR95EVM, could you please kindly offer the part number or a reference layout file?
Thanks,
Sophie
Part Number: DLPC410 Hi,
I've just got the Discovery DLP4100 Kit that has the DLPC410 Chipset, I have followed the installation process and every time I go to update the driver the folders only have Windows 7/8/10 but like I said I'm running Windows…
Part Number: DLPC410 Other Parts Discussed in Thread: DLP9500 , DLPLCRC410EVM , Hello,
According to the datasheet of DLP9500,the max pattern rate is 23418Hz. But DLPLCRC410EVM can not meet the requirment.
So, how can I design to meet the requirment as much…
Part Number: DLPC410 Hello,
Upon startup the D2 LED is red and remains red unless I connect the board via usb to the Discovery 4100 GUI and wait for the D4100_GUI_FPGA.bin to programmed at which point D2 turns off and D16 turns green. As user "Fizix" mentioned…
Part Number: DLPC410 Other Parts Discussed in Thread: DLPLCRC410EVM Hello,
I would like to consult on the matter below: In the DLPC410 datasheet (DLPS024G –AUGUST 2012–REVISED FEBRUARY 2020), for PWR_FLOAT pin, it is stated that: "Connected…
Part Number: DLPC410
Hello, In the DLPC410 datasheet this signal is stated as active high, meaning, once the DLPR410 finished to load it will go high (page 14 in the DS)
but later on on page 61 (section 9.3 - Initialization Setup) it is stated that it…
Hello Fizix,
Sorry, I somehow missed your reply... the thread name is :"DLPLCRC410EVM Comunicate with the DLPLCRC410EVM through Matlab or Python". and the link : "https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/812675/dlplcrc410evm…
Part Number: DLPC410 Hello,
My coworker purchased a DLPRC410EVM for a research project. I purchased a 5V, 6amp power supply. I followed the directions on the manual precisely to turn it on, but nothing would power. No LEDs were triggered, even after inserting…
Part Number: DLPC410 Other Parts Discussed in Thread: DLPLCR65NEVM , HI,
My setup:DLPC410 VIRTEX-5 DLPLCR65NEVM
First, DMD can correctly load display data when using GUI. But when I programmed with Verilog myself, I encountered some problems.
1、The INIT_ACTIVE…