Part Number: DLPC6401 Other Parts Discussed in Thread: DLPC350 , TIDA-00782 , DLP4500 I'm an engineer for a design house helping a customer update an obsolete DMD + controller. For the updated design, they've selected the DLP4500 DMD and the DLPC6401…
Part Number: DLPC6401 Hello all,
I'm developing a custom PCB for the DLPC6401. I having trouble getting the device to boot. I have loaded firmware image onto the flash chip and then soldered the chip on the board. However, the POWER_ON_OFF pin is not…
Part Number: DLPC6401 Other Parts Discussed in Thread: SEGGER , DLPC350 Tool/software: We’re having problems trying to boot the DLPC6401. Several questions have come up while trying to troubleshoot the problem.
Where do I find a BSDL file for the…
Part Number: DLPC6401 Hello,
I am designing a DLP control board with the DLPC6401. In various documents and posts, I see the DLPC6401 GUI tool mentioned. However, I cannot find a download link. Can you provide me with the download?
Also, I am unclear…
Part Number: DLPC6401
Hello,
I have downloaded the CAD/EDA file for the DLPC6401. It seems a few pads are connected incorrectly. Pad E18 is connected to pin VDDC_10 but according to the datasheet it should be connected to Vss. In TIDA00782 DLPC6401…
Part Number: DLPC6401 Hello,
I want to dim the DLPC6401 over i2c.
I have a linux computer connected via i2c to the DLPC6401.
I am using the archlinux package i2c-tools.
When I run an i2cdetect on my linux computer I see the following:
root@archlinux …
Part Number: DLPC6401 Hi,
We are using DLPC6401 in the Design.
There is no information on voltage/current for pin "EXRES". Just given 1% resistor.
We have connected 160Ohm 1% resistor with 0.05W(0201 package) for EXRES. Please confirm the power…
Part Number: DLPC6401 using DLPC6401 to do. 45 1080P DLP projector, the main platform using RK3128, currently encounter a use problem as follows: Please help see if there is any solution.
开机初始化配置屏幕旋转没有效果，开始初始化配置亮度没有效果。具体配置如下：
1、Turn on the initial configuration…
