Part Number: DLP2010LC Other Parts Discussed in Thread: DLPDLC-GUI
Hi Experts,
As the title shown, we do not want to update flash in our product.
Thanks
Gavin Wu
Hi Chris,
Are you able to use the DLPDLC-GUI to run the same settings and check if you can see the same behavior?
Do you have an EVM or a custom board? If you are using an EVM, please make sure the jumpers set up correct.
Regards,
Lori
Daer Maximus Rusi I'm sorry for the lare reply.
1) Are you using a DLP EVM or a custom board?
[LP KIM] No. I am using TI's DLP3010EVM-LC and DLPC Gui Tool.
EVM : https://www.ti.com/tool/DLP3010EVM-LC?keyMatch=&tisearch=search-everything&usecase…
Part Number: DLPC3478 Other Parts Discussed in Thread: DLPDLC-GUI , DLP3010EVM-LC Any update on when a new version of the dlpc3478 firmware that fixes this will be available for testing?
Hello User,
We have noticed that there are some issues in the GUI -> Update Flash image tool and our team is working on fixing these issues.
Can you provide the exact settings that you want to change in the custom .img file? Do you want only change…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPC3478 , DLPDLC-GUI Hello.
I am now looking for a way to set the LED start current.
The default current set on the DLPC3478 is 1500mA, which is too high for my purposes.
I updated the firmware…
Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: DLPDLC-GUI I am using the DLP3010EVM LC.
The requirement is generation of binary patterns and projecting the same.
The pattern is similar to
I have downloaded the latest version of the DLPDLC…
Hello User,
Welcome to the E2E forum and thank you for your interest in DLP® technology.
Do you own an EVM or a custom board?
Have you tried using DLPDLC-GUI to send the same commands and check if that is working for your system?
It would be a good…
Hello Gabriel,
Can you please let us know on which firmware version the programming is failing? Also, can you please try to see whether you observe the same issue while programming flash image on DLPC3010EVM-LC using DLPDLC-GUI ( https://www.ti.com/tool…