Archie
The easiest EVM option to support wavelength of 800 nm and pattern rates of 5 kHz are the combination of:
DLPLCR65NEVM www.ti.com/tool/DLPLCR65NEVM it uses the high power NIR DMD DLP650LNIRFYL
And
DLPLCRC410EVM https://www.ti.com/tool/DLPLCRC410E…
Hello KG,
We do offer the DLPLCR65NEVM combined with the DLPLCRC410EVM .
This EVM is very flexible and will allow operation of just a few rows or a block. To get very high speeds will require programming the APPS_FPGA with your own custom design.
What…
Hello again Yujie,
You asked:
1. I recall in the other thread we discussed about DLP650LNIR and if I use Load4 to only update 8 rows per block I could effectively go up to ~40kHz update rate. Just want to confirm that the actual hardware I will need to…
Part Number: DLPC410 Other Parts Discussed in Thread: DLPLCR65NEVM , HI,
My setup:DLPC410 VIRTEX-5 DLPLCR65NEVM
First, DMD can correctly load display data when using GUI. But when I programmed with Verilog myself, I encountered some problems.
1、The INIT_ACTIVE…
Part Number: DLPLCRC410EVM Other Parts Discussed in Thread: DLPLCR65NEVM , DLPC410 , DLP9500 , DLP650LNIR Hello Team,
According to user manual, it guarantee 32k frame rate on DLPLCR65NEVM.
However, I found the max frame rate is about 6.8Hz when using GUI…
Part Number: DLPLCRC410EVM Other Parts Discussed in Thread: DLPLCR65NEVM , Hello,
We want to develop an infrared single pixel imaging system using a TI DMD and an IR detector that we have fabricated.
We have two requirements:
1) We need the operating wavelength…
Part Number: DLPLCRC410EVM Other Parts Discussed in Thread: DLPLCR65NEVM , Hi team,
Our products(DLPLCRC410EVM, DLPLCR65NEVM) have a startup problem, which I have post on this forum, starting operation problem.
I have contacted with our supplier and they…
Part Number: DLPLCRC410EVM Other Parts Discussed in Thread: DLPLCR65NEVM , , DLPC900 , DLPC410 Hi Team,
I have some questions with DLPLCRC410EVM Controller Board (we bought DLPLCRC410EVM + DLPLCR65NEVM). I follow the steps of Hardware Overview and Setup …
Part Number: DLPLCRC410EVM Other Parts Discussed in Thread: DLPLCR65NEVM , Hi team,
Our kit(DLPLCRC410EVM, DLPLCR65NEVM) have a startup problem, which I have post on this forum, starting operation problem.
Since we didn't purchase these two board at the…
Part Number: DLPLCRC410EVM Other Parts Discussed in Thread: DLPLCR65NEVM , , DLPC410 , DLP650LNIR Hello team,
I have another question for our kit(DLPLCRC410EVM + DLPLCR65NEVM). I find the pattern changing rate of DMD is up to 32 kHz if we input an 1-bit…