Part Number: DLPLCRC900EVM Other Parts Discussed in Thread: DLPLCR65EVM Tool/software: Hi. My DLPLCRC900EVM output is broken. There are no output signals from output1 and output2. It maybe caused by connecting the DMD output GNDs and DMD power GND as…
Part Number: DLP6500FYE Other Parts Discussed in Thread: DLPLCR65EVM , DLPLCRC900EVM , , DLP6500FLQ , DLPC900 Tool/software: Hello,
I hope you are doing well.
I am planning to buy DLPLCR65EVM chipset with DLP6500FYE DMD along with the DLPLCRC900EVM controller…
Part Number: DLPLCRC900EVM Other Parts Discussed in Thread: DLPC900 Tool/software:
I have a DLPLCRC900EVM board, and tried to update the bootloader image using the UM232H module.
When I run JTAG Flash Programmer and click the Detect Chain tool button, …
Hello Hidenori,
It's great to hear that we've been able to identify the issue! A TVS diode protects the system against transient voltages like ESD. In our use cases, we've placed a buffer. You might consider also a level shifter as a buffer or possibly…
Arynn,
First you will need to obtain the latest DLPLCRC900EVM board for this to work.
Before you do that, is the 5 - 10 seconds between pattern sets acceptable? It will be "dark" during that time.
Fizix
Hi Heeju,
I am sorry for the delay. I have time zone GMT-5. I see that Korea's is GMT+9, so we have a 14-hour time difference.
I can suggest two dates/times each for morning or evening call. I'll choose the first time, and you can let me know if you…
Part Number: DLPLCRC900EVM Hello. I have two DLPLCRC900EVM with a dlplc65evm. I want to control both DMDs in video mode or prefereable video pattern mode using a raspberry pi. As i understand, the GUI is not compatible with linux, and in any case it can…
Part Number: DLPLCRC900EVM Other Parts Discussed in Thread: DLPC900 Hi,
I have burned the component GL01GS11FHIV2 of the evaluation board due to a high voltage by accident. I understood that it was the flash memory of the board. I want to try to replace…
Part Number: DLPLCRC900EVM Hello,
I believe I am having a similar issue to: https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/1105207/dlplcr67evm-usb-device-not-recognized .
When powered on my DLP9000EVM has all of the correct lights…
Part Number: DLPLCRC900EVM Hi TI team,
I had a DLP6500 DMD module but the dlplcrc900evm board burnt. One of the component (No# C170) got burnt to dark. My questions are: 1. Is it still fixable or should I directly replace the control board by a new one…
