Part Number: DLPR200 Other Parts Discussed in Thread: DLPC200 I could find a DLPC200 firmware as ver2.1.6.
However, below post says a latest version is 2.3.0. Where can I get the firmware?
Part Number: DLPR200 Other Parts Discussed in Thread: DLPC200 ,
My customer is using DLPC200 and DLP chipset for 3-D machine vision from 2013~ .
They are using DLPR200F ver2.2.0 as latest.
Anyway, I have found that vesion of DLPR200F updated to…
This sounds like the USB interface is not initialized with the custom code for this platform.
Did your customer use the same Cypress USB chip used in the TI platform?
If yes, did they program the Cypress PROM with the custom code provided…
Other Parts Discussed in Thread: DLPC200 , DLPR200 Hi,
When I turn on a power supply of DLPC200 earlier and turn on the powersupply of the PC 12 seconds later,
USB connection is not possible.(Custom Boards)
It is normally connectable if PC is turned on…
I suggest you to download the firmware from here http://www.ti.com/dlpr200fver220 as on this date this is the latest version. Normally the firmware kept here http://www.ti.com/tool/dlpr200
After you download you must install on your PC.…
Other Parts Discussed in Thread: DLPR200 Hi,
I am new to the DLPR200, and I'm still trying to figure out how things work. Our goal is the following: We have some (binary) patterns between which we would like to switch at irregular intervals while a camera…
Welcome to DLP&MEMS forum.
The exe expects a mandatory input parameter you must provide that. Otherwise it will return error.
I am assuming you are trying with _SampleApps solution from the web DLPR200APP component from http://www.ti.com…
It is evident that your MCU firmware is not upgraded to the latest.
Goto this link and download the MCU firmware from here http://www.ti.com/tool/dlpr200DLPR200F.
Then download and install the firmware on your machine. Then using LC GUI tool…