Part Number: DLPR350 Other Parts Discussed in Thread: DLPLCR4500EVM Hello,
I am currently working on a project, in which I am using python and MATLAB to communicate with the DLP4500EVM, based on the source code of the GUI provided on your website. I would…
Part Number: DLPR350 Other Parts Discussed in Thread: DLPC350 Hello,
I am very new to this technology and we want to use it for imaging. We would like to control the DLP from MATLAB through SDK but I have no clue where to start. I appreciate if someone can…
Hello Cathal,
Welcome back to the E2E forums and we hope to assist you with your questions.
What are your trigger settings in the GUI? Also note the following:
From the GUI it looks like you did not create any pattern and send it. You need to create…
Hello Joselito Go,
Thank you for the information.
The top red LED is indicationg there is a fault status by the DLPC350 normally there should be a green LED blinking indicating everything is okay.
Can the customer look into a few issues:
1. Can they check…
Hello Tobias,
Welcome to the E2E forums and we hope to assist you with your questions.
There are certain blanking and timing parameters that must be followed to get 120 Hz working but we have tested and confirmed 120 Hz does work on a DLPLCR4500EVM in…
Hello Asaph,
Welcome to the E2E forum. Thank you for your business!
Can you reflash the default firmware using the most recent GUI? The GUI can be found here: https://www.ti.com/tool/DLPLCR4500EVM . The firmware can be found here: https://www.ti.com/tool…
Hello Matteo Fissore,
Welcome to the E2E forums and we hope to assist you with your questions.
As you mentioned, there is a difference between connectors so the DMDs will not be directly swappable. The DLPLCR4500EVM uses a FQE package connector for the…
Hello Mohamed,
I would check the following.
1.
I would check the following power signals. All of these are related to the DMD input power signals or power rails and first ensure these are all in specification.
2.
Can you also send a picture of your GUI…
Hi Tazawa,
Welcome to the E2E forums and we look forward to helping you with your questions.
I was checking online and we do have version 4.1.0 which is this following download I highlighted and there is a read me in there once downloaded.
https://www…
