Part Number: DRV-ACC16-EVM Hi Team,
The customer is experiencing below issues and needs your help.
1. I want to confirm with you that the algorithm for this waveform is 49(Vpeak)/57=0.86gpeak,
Or 76(Vpeak to peak)/57/2=0.667gpeak.
Which algorithm is correct…
Part Number: DRV-ACC16-EVM Hi TI team, The USB cable included in this DRV-ACC16-EVM kit is too short for my application. Can I switch to a longer USB cable? What is the maximum length that can be supported without affecting the measured data? Thank you…
Part Number: DRV-ACC16-EVM Hello team,
I'm looking to replace an Accelerometer sensor from STmicroelectronics and came across this EVM; do you think it could be used to evaluate the vibrations of the weigher during the weighing phase. The specs are to…
Part Number: DRV-ACC16-EVM Hello support team,
My customer inquires the following three questions, could you support?
* Application note shows "Typical Temperature Dependency (-25degC to 70degC) <3mg", what does mean? Acceleration changes 3mg…
Part Number: DRV-ACC16-EVM Respected TI Community Members,
We're constructing a Ground Penetrating Radar and is has been placed on trolley. We intend to use DRV-ACC16-EVM to detect and calibration our reading according the vibrations when we move the…
Part Number: DRV-ACC16-EVM I intend to interface DRV-ACC16-EVM with TM4C123GXL, I was unable to find relevant documentation on this. Can I get some suggestions with regards to this?
Part Number: DRV-ACC16-EVM Hello great people,
I am a student and currently a part of the texas university program. In my project, I need to make use of the accelerometer (although TI has none available). But, I found the reference design " DRV-ACC16…
Mukuno-san,
It may also be valuable for the customer to measure the acceleration of the actuator when performing these cold temperature tests.
using an accelerometer such as this https://www.ti.com/tool/DRV-ACC16-EVM
This test could determine if the LRA…
