Part Number: DRV10983 Other Parts Discussed in Thread: , MCF8316A Hi Team,
The customer uses the DRV10983EVM control color wheel motor. The circuit architecture and DRV10983EVM GUI settings is shown as below:
The customer measured that the FG signal…
Part Number: DRV10983 Hello Team,
I have 3 questions:
1. What is the difference between DRV10983PWP and DRV10983PWPR?
2. If no microcontroller is used, can all PINS 10 (SCL), 11 (SDA), 12 (FG), 13 (SPEED), and 14 (DIR), be left floating?
3. In the datasheet…
I will close this for now, since I haven't heard a response back. If you want a follow-up, please feel free to create a new thread by clicking "Ask a related question" button located on top right of this page.
Part Number: DRV10983-Q1 Hi Team,
1) Can the DRV10983Q1 set the PWM operating range? Now only the lowest duty cycle setting is seen, below 5% is output at 5% and below 1.5% is output at 0. Is there a maximum duty cycle setting that allows it to output…
Part Number: DRV10983-Q1 Dears,
1. Can DRV10983Q1 set the PWM working range? Currently, we only see the minimum duty cycle setting. If it is less than 5%, it will output 5%, and if it is less than 1.5%, it will output 0; Is there a maximum duty cycle…
Part Number: DRV10983 Hi, Ti expert.
The customer applies DRV10983PWPR and there is a problem that the motor does not operate well during the test.
The motor seems to start initially, but there is a problem with stopping immediately. I don't know what…
Part Number: DRV10983-Q1 Other Parts Discussed in Thread: DRV10983 Hello experts,
Our customer encountered some problems when design DRV10983-Q1, can you help with it:
No
PN
Question describe
reply
1
DRV10983
When the LDO mode is selected…
Part Number: DRV10983-Q1 I wish to control four DRV10983-Q1 ICs with one controller using I2C interface. The DRV10983-Q1 device provides an I2C slave interface with slave address 101 0010. How can I change the address of individual DRV10983-Q1 so that …
Part Number: DRV10983 Hello Sir,
I am reading fan speed feedback using motor period register. I needed to make the fan to rotate in both the direction, I thought of using RPM feedback that was calculated by the help of Motor Period to detect the fan is…