Part Number: DRV10987 Other Parts Discussed in Thread: DRV10974 Tool/software: Hi team,
my customer is using DRV10987 for motor driver. The SCH is as below,
but customer finds the motor can not start up successfully randomly. The ratio is about…
Part Number: DRV10987 Tool/software: Hello,
If I am controlling motor speed through I2C SPEED_CTRL register 0x30, with Bit 15 override = 1, what should I do with SPEED pin? Leave floating, pull up or pull down? Thanks
Part Number: DRV10987
Tool/software:
Hello,
For using the DRV10987's voltage regulator in linear mode, is it required to use a Zener diode in conjunction with the 39 ohm resistor, as shown in the schematic for the EVM board? What are the specs of…
Part Number: DRV10987 Hi
We are using DRV10987 in our existing application. Kindly let me know whether we can have direct access to config registers without using the EEPROM.
Actually We have tried this bypassing EEPROM, we are directly writing…
Part Number: DRV10987 Other Parts Discussed in Thread: USB2ANY Hi
We are using DRV10987 for our application. The same motor driver was working for more than a year in our device. But recently we have got an error of EEPROM not ready for read/write access…
Part Number: DRV10987 Other Parts Discussed in Thread: , DRV10975 Tool/software: Hi,
my customer meets the"EEPROM is not ready" with DRV10987EVM and with customer boards. the detail information about this issue is attached.
Pls note that customer…
Part Number: MCF8315C Other Parts Discussed in Thread: DRV10987 Tool/software: Hello
I have a question about MCF8315C TSSOP product.
This product's package type is same as the DRV10987 and has same package size.
But their thermal resistances are…
Part Number: DRV10987 Hi,
I want to do a simulation of DRV10987 before produce the designed PCB. I downloaded PSpice for TI app but this IC doesn't in there. I searched on web but i couldn't find it. Is there any simulation model or can you share your…
Part Number: DRV10987EVM Other Parts Discussed in Thread: DRV10987 Tool/software: Dear TI team,
Using DRV10987 EVM board for Motor tuning. But facing the over current issue,
My motor parameters are
Phase to center tap resistance: 0.931 ohm
BEMF…
