Hi Sydney,
i am not able to write on the DRV2605L-Q1.
The 1st image shows the configuration of the IIC clock and timing, please verify if its correct? i am confused regarding the SDA hold time and the I2C Trise time, the 2nd image is from the DRV2605l…
Part Number: DRV2605L-Q1 Hi,
The customer wants to add a haptic function to the column SBW.
Is it possible to diagnose the OPEN SHORT status of the actuator only when it is active?
Part Number: DRV2605L Other Parts Discussed in Thread: DRV2605 Dear experts In our project we are using the DRV2605L in combination with an LRA (240Hz resonance, 0.1...1.2Vrms drive voltage). The DRV2605 is in closed loop mode with PWM input (f=20kHz, D…
Part Number: DRV2605L Hi, experts:
Do you have any demo code of LRA application with I2C? The datasheet or other reference notes in your web do not show how to send I2C messages to notify DRV2605L to control the motor to vibrate, thanks.
Part Number: DRV2605L-Q1 I am using this IC DRV2605L-Q1 to provide haptic feedback for capacitive touch switches. Please let me know where can i get its sample code for quick start.
Thanks....
Part Number: DRV2605L Hello,
We are using the DRV2605L in our product, we decided to switch to an LRA requiring open-loop operation. We are only using RTP mode.
I am however having trouble to make it work properly. I switch to demo boards to make it easier…
Part Number: DRV2605L Hi, Sydney:
I can control the motor to vibrate now, but the strength seems not strong enough, I tried all 123 waveforms and selected a stronger one, but still not very satisfied with it, then I tried to increase the Vrms value…
Part Number: DRV2605L Other Parts Discussed in Thread: DRV2605 Hi:
I have a question about the LRA Initialization example in <DRV2605 Setup Guide> as below:
What should I set to register 0x18 and 0x19? Could I use the default value without setting…
Part Number: DRV2605LEVM-CT Other Parts Discussed in Thread: USB2ANY Hi Team,
My customer plan to design this solution but seems too complicated.
I request EVM board for them but don't know how to start it.
May I know do we have presentation material…
Part Number: DRV2605L Hi,
I am using the DRV2605L to design a prototype for a haptics based product. I am having issues getting the autocalibration to complete successfully. I am using an LRA in closed loop mode. The LRA has the following parameters: …