Part Number: DRV2625 Other Parts Discussed in Thread: USB2ANY , Hi Team,
I bought DRV2625EVM-MINI and USB2ANY for LRA drive.
When using the DRV2625EVM-MINI with USB2ANY, which version should I use with the firmware of USB2ANY? VDD(=3.3V) was not output,…
Part Number: DRV2625EVM-CT Other Parts Discussed in Thread: DRV2625EVM-MINI , DRV2625 Hello,
I am using the DRV2525EVM-CT to evaluate an external LRA device. I would like to set the LRA device inside the enclosure and evaluate it using I2C communication…
Part Number: DRV2625 Hey,
I am Evaluating DRV2625EVM-MINI Evaluation Board with an Linear Resonant Actuator whish spécification are:
-Vibration-Frecency: 2.5Grms@100Hz(Fact)
-Thermal Resistance: 15.3Ω
-Power Consumption: <300mW @2.23Vrms…
Hi Jackson,
You can connect an external I2C source to J4, as long as it is referenced to the same potential (3.3V).
Although this EVM is mainly purposed to be controlled by on-board MSP through Haptic Control Console software, thus the on-board actuator…
Part Number: DRV2625 Hi,
We are evaluating the DRV2625 using the DRV2625EVM-MINI evaluation board. In our initial test setup, we were encountering under-voltage errors until we increased the capacitance for C(vdd) input capacitor, which resolved the problem…
Part Number: DRV2605L Other Parts Discussed in Thread: DRV2625EVM-CT , DRV2605EVM-CT , DRV2625 , DRV2625EVM-MINI The TI site says the Hap-Touch boosterpak is still available at Newark but they don't list it.
Not on TI store as it goes to Newark for the…
Other Parts Discussed in Thread: DRV2604 , DRV2605 , DRV8601 , DRV2625EVM-CT , DRV2605EVM-CT , DRV2625 , DRV2625EVM-MINI I need use DRV2605 , DRV2604 or DRV8601 to drive the LRA which used in some phones like S6/S7 or note . I need a circuit or pcb to make it…
