Part Number: DRV2700EVM-HV500 Tool/software: I purchased a piezo driver (DRV2700EVM-HV500) from DigiKey in the end of this February. At first, when I connected it with piezo disks, it works well. However, currently I found that it didn’t work, no matter…
Part Number: DRV2700EVM-HV500 Hello,
New and not know much about of Piezos, but I have DRV2700EVM-HV500 and got few piezocermic trimorph bending actuator. So can I drive bender with this evaluation board? Bender guide says "It is suggested to use a…
Part Number: DRV2700 Tool/software: Hello TI Support,
I am using DRV2700 EVM for my piezo driver needs, but I see that voltage at the output significantly drop when i put switches to 500 V setting. I also observe voltage drops at other voltage settings…
Part Number: DRV2700EVM-HV500 Other Parts Discussed in Thread: DRV2700 , DRV2700EVM Hello,i have a doubt, to use the DR 2700 EVM still with a ThorLabs device, but the 650nF PC4QM device , would it be possible? Has anyone worked with a combination of these…
Part Number: DRV2700EVM-HV500 Hello,
i have bought drv2700evm-hv500 board,
i conncetd the piezo injector and testing it,
i want to actuate it faster , for example at 150hz frequncy, with 1ms on and rest off.
it is possible to achive with this…
Part Number: DRV2700EVM-HV500 Hello,
i need help with actuating the piezo injectors which has capacitance of 1uf and resistance of 200k ohms. can anyone tell me does drv2700evm-hv500 able to actuate it. if not which is the suitable ic.
i dont have…
Part Number: DRV2700EVM-HV500 Hello, My customer has a DRV2700EVM-HV500 but does not currently have a piezo element to connect. It seems that it will take a long time to acquire a piezo element. They want to evaluate the DRV2700EVM-HV500 output by connecting…
Part Number: DRV2700EVM-HV500 Other Parts Discussed in Thread: DAC63204 , Hi all, Currently I am using DRV2700EVM-HV500. I need to drive a piezo actuator (350nF) from 0 to 150VDC. I am using DAC63204 as my analog input. I already set my EVM boost voltage…
Part Number: DRV2700EVM-HV500 Other Parts Discussed in Thread: DRV2700 I just purchased the DRV2700EVM-HV500 evaluation unit and looking to write my own control SW.
Does TI offer any LabView VIs?
Can I get the DLLs?
Any documentation that can help…
Part Number: DRV2700EVM-HV500 Hello,
I am using the DRV2700EVM-HV500, when I am measuring the output I am getting a huge ripple in the output without any capacitive load.
When I set the output to 158V in DC mode and measure the output in oscilloscope…
