Part Number: DRV3255-Q1 Other Parts Discussed in Thread: DRV3233-Q1 Tool/software: I was browsing the BLDC drivers tab on the TI website, and found that the datasheets for the DRV3255-Q1, DRV3233-Q1, and DRV-3256-Q1 don't have much useful development…
Part Number: DRV3255-Q1 Tool/software: Hello there,
For my application, I need to drive half bridge with 8 mosfet. Each side four mosfets are connected in parallel, each mosfet having a total gate charge of 8nC. Is it possible for me to drive the mosfets…
Part Number: DRV3255-Q1 Dear Team,
I am working on a project that requires a 3-Phase BLDC Solar pump control system. I have considered using the DRV3255-Q1 driver, but it does not meet my specifications. I need a 5HP pump that can operate with the…
Part Number: DRV3255-Q1 Hello,
we have a need to increase the PWM switching frequency of our 3-phase BLDC 48V motor driver up to >40kHz, but our current driver can only go a little above 20kHz with the MOSFETs we're using because of its limited charge…
Part Number: DRV3255-Q1 Hello,
our motor drive application might have a mode where we want to power-up the driver and have the PWM inputs drive the gate drive outputs without any configuration over SPI. We have found with some other vendors drivers that…
Part Number: DRV3255-Q1 Hello,
our motor drive application might require us to put the driver into a disabled or reset state so that another driver can take over the low-side MOSFET gate drive. We have found with other vendors drivers that some have a…
Part Number: DRV3255-Q1 Hello TI Team,
We are planning to use the DRV3255-Q1 for our motor drive application. The design documents are not available on the website.
https://www.ti.com/lit/ds/symlink/drv3255-q1.pdf?ts=1687762283694&ref_url=https%253A…
Part Number: DRV3255-Q1 Other Parts Discussed in Thread: DRV8353 , CSD19536KCS Is DRV3255-Q1 gate driver compatible to be used for 2.5 kW motor controller for sinusoidal control with 40 amps continuous current and 62 voltage DC Bus voltage. Is it more…
