Part Number: DRV5032-SOLAR-EVM The DRV5032-SOLAR-EVM receved can not satisfy my needs. It is possible to send it beak to a France Office and be refunded? Regards. Annoni
Part Number: DRV5032-SOLAR-EVM Since for my need I can't use the mentioned EVM please let me know a france Office were I can send the EVM and be refounded. Thank you for the assistance. Annoni
Part Number: DRV5032-SOLAR-EVM Other Parts Discussed in Thread: DRV5033 , HALL-ADAPTER-EVM Hello,
I want to use DRV5033 instead of the micro switch we currently have. The functionality of the micro switch is to inform the controller when the sprinkler has…
Part Number: DRV5032-SOLAR-EVM Other Parts Discussed in Thread: DRV5032 , DRV5053 Dear Sirs, I receved your DRV5032 Ultra-Low Power, 1.65V to 5.5V Hall Effect Switch Sensor Evaluation Module but I’m not scure if it can be helpfull for me. I need to mesure…
Hello Christian,
We've finished a set of tests and have concrete results, and I can assure you that the BQ24650 doesn't start charging on a fully discharged battery (zero volt).
To make it clearer, I'll describe the totality of the tests carried…
Part Number: BQ25792EVM Other Parts Discussed in Thread: USB2ANY , EV2400 , BQ25798 , BQ25792 Tool/software: I'm trying to simulate MPPT of a solar panel for a satellite using BQ25792EVM. Sun Simulator is ready, so we only need MPPT to be ready, but…
Part Number: BQ25638 Hello ti team,
We found out when we were doing Charge with Solar Power Source Simulator testing。
At 4.1V, the Vbus input 10-30mA current, BQ25638 to charge the battery current is 0mA, this phenomenon also appears in EVM。
I would…
Part Number: BQ24650EVM-639 Other Parts Discussed in Thread: BQ24650 , BQ25895 I have recently ordered the BQ24650EVM-639 module and have been trying to use it for mttp. When connecting a solar panel as Vin and the resistive load as Vsys and a 12V battery…
Part Number: DRV8462EVM Other Parts Discussed in Thread: DRV8462 Hi,
Can I please receive help to program the DRV8462 EVM using the scripting function to go forwards until stall and then reverse until stall for a calibration step and then use the step…
This is a very good question and something most people don’t really think about. Essentially any piece of electronic equipment that has moving parts has the potential to use a position sensor and home appliances are a perfect example of this. In short…