Part Number: UCD3138 Hi,
I need to select a suitable eval board to use so that I can drive my power electronics properly. I have 2 PWM signals that have a fixed overlapped duty cycle and need to vary the PWM frequency, as well as having a second separate…
This is a very good question and something most people don’t really think about. Essentially any piece of electronic equipment that has moving parts has the potential to use a position sensor and home appliances are a perfect example of this. In short…
Part Number: TIDM-SOLAR-ONEPHINV Hello All,
We are developing a solar inverter using EVMs : http://www.ti.com/tool/TMDSHVM PPTKIT and http://www.ti.com/tool/TIDM-SOLAR-ONEPHINV .
We've realized new EVMs:
HV_1PH_DCAC - http://www.ti.com/tool/tidm-…
Part Number: DRV8462EVM Other Parts Discussed in Thread: DRV8462 Hi,
Can I please receive help to program the DRV8462 EVM using the scripting function to go forwards until stall and then reverse until stall for a calibration step and then use the step…
Part Number: LDC3114 Other Parts Discussed in Thread: HALL-HMI-ROCKER-EVM , DRV5032
Question : Can home appliances – specifically range hoods – use position sensors such as Inductive sensors for push-buttons, or Hall-effect sensors for rocker switches?…
Hello Xiufa, Thanks for being patient with the delay. There's been a mix up with the system. For VAC1, the BQ25798 can support 2 inputs. Because you have a solar panel, you can connect VAC1 to VBUS. BATP is used to measure the voltage on the battery…
HI Poorti,
Regarding 1, I don't think having VAC2 connected to a cap instead of VAC1 will damage the IC but haven't tested it. I have had other customers connect VAC2 sense to an arbitrary voltage and then use the ADC to measure that voltage. …
Part Number: TIDM-SOLAR-ONEPHINV Other Parts Discussed in Thread: CONTROLSUITE Support Path: /Product/Development and troubleshooting/ Hi Sir/Ma'am,
Good Day!
I just want to ask how to set the build 1 for the EVM, TIDM-SOLAR-ONEPHINV. Does it also…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: BQSTUDIO , BQ34Z100EVM , EV2400 , BQ34Z100 , GPCCHEM Hi, TI expert.
A customer is reviewing the BQ34Z100-G1 and has a question.
- Application: Tracker Control Unit (TCU), which controls the motor that…
Part Number: BQ24650 Tool/software: Hello,
We have designed a solar charging circuit using the BQ24650 for a single cell Li-ion 3x18650 battery pack (nominal 3.7V).
We have tested using various panels at 9V and 12V and adjusted MPPSET divider accordingly…