Part Number: DRV5056 Other Parts Discussed in Thread: DRV5032 hi,
I wish to use a new hall ic for 10mT range , i would like to know if any other hall sensor which detects in between 5mT-11mT , please let us know. Until now, I have been using DRV5056A2…
Part Number: DRV5056-Q1 Hi,
I'm developing a position detection system to control the position of a shaft as it slides past the hall sensor (see my picture below).
Due to space constraints, the magnet is fitted to the shaft.
The air gap between the…
Part Number: DRV5056-Q1 Other Parts Discussed in Thread: DRV5056 , DRV5032
Hi, I want to understand supply current value. The sensor is typically taking ~6mA current at ambient temperature.
With change in temperature the supply current follows this curve…
Part Number: DRV5056-Q1 I'm using a DRV5056A3-Q1 sensor in an application where the supply voltage Vcc=3.3V. I use a magnet with Br=1.26 diameter d=5mm and thickness s=1mm. The initial distance between the sensor and the magnet is 3.29 mm. The body on…
Part Number: DRV5056-Q1 Hi,
The TI tool takes into consideration d1 distance from the surface of the sensor IC for sensing of distance measurement.
Whereas, the sensing element is placed at 0.47mm inside the IC from the surface.
Do we need to take into…
Part Number: DRV5056 Hi team,
1, as shown in the figure, we use open-loop measurement to detect the current and then to calculate the magnetic induction strength B, we use B = µ0 * H (where µ0 is the vacuum permeability, H is the magnetic field strength…
Part Number: DRV5056-Q1 Other Parts Discussed in Thread: DRV5056 Hi team,
I have two questions would like to check with you.
1. Referring to below formula, the Vout in equation 1 stands for the device's output, correct? Or we should use this equation…
Part Number: DRV5056-Q1 Hi team,
My customer wants to minimize voltage noise. Are there any other effective measures besides the bypass capacitor and RC filter in the block diagram?
Regards,