Part Number: DRV8143-Q1 Hi team,
For OLD diagnostics for the DRV8143-Q1, could you please help solve these questions? Thanks.
1. Could you explain the working principle of this schematic?
2.Could you explain why both OPEN and Short are high level…
Part Number: DRV8143-Q1 Other Parts Discussed in Thread: DRV8144-Q1 Hi team,
Customer want to connect IPROPI pin to ADC of controller, but they have some concerns as below, could you pls help to solve, thanks:
1.Recommendations for selecting RC filter…
Part Number: DRV8143-Q1 hi
I am using DRV8143 SPI(S) Variant in my circuit.
There are some problem to control the chip with ESP32-S3 via SPI.
I can read Devie ID of the DRV8143 and device ID is 0xBA.
And these are all register values of the chip…
Part Number: DRV8143-Q1 Hi Team,
As you can see from the oscilloscope view below (yellow being the IPROPI signal, Purple being the Output current signal), as the device starts, the IPROPI voltage is below the desired range however the current keeps…
Hi Marvin,
Please see below information from the datasheet. The nSCS must go back HIGH after every frame of 16-bits or 16 SCLKs. A write operation is completed and the data written at the rising edge of the nSCS at the end of every frame. A read may…
Part Number: DRV8143-Q1 Tool/software: Hello:
We use DRV8143-Q1 as the Driver IC in our product.
Chip burnout occurs under the following conditions:
Electromagnet as a load , configured on the low side.
VM power supply : 26–30 V.
…
Part Number: DRV8143-Q1 Tool/software: Hi there
I will use the DRV8143HQDGQRQ1 in my design.
In the datahsheet I did not find any information about the "Thermal Pad" of VSSOP-28 package.
Can it safely tied to GND? Or what is the recommendation…
Part Number: DRV8143-Q1 Tool/software: Hi Team,
I'm working on 2 DRV8143S-Q1 (VQFN) devices that shall work simultaneously, However the charge pump on these devices don't go above 12V. When I give HIGH signals to nSLEEP and IN, I only get 0.4V at the…
Part Number: DRV8143-Q1 Tool/software: Hi Team,
I'm trying to use the ITRIP regulation function on the device however after reaching the trip current, the device oscillates for a brief time and then shuts off due to over temperature. As you can see…
Part Number: DRV8243-Q1 Other Parts Discussed in Thread: DRV8244-Q1 , DRV8143-Q1 , DRV8242-Q1 , DRV8144-Q1 , DRV8245-Q1 , DRV8145-Q1 OLP: Load Monitoring SPEC items interpretation for DRV8242-Q1,DRV8243-Q1,DRV8244-Q1,DRV8245-Q1 and DRV8143-Q1,DRV8144…
