Hi Junho,
Do you require additional assistance here?
Please let us know if there are any lingering requests pertaining to this topic - or if we can close the thread.
Best Regards, Andrew
Part Number: DRV8304 Hi,
Is there some feature in this DRV that disables it when it senses no load across the phases?
If not, does the DRV do anything at all when motor phases are not connected but everything else is connected and is working correctly…
Part Number: DRV8304 Hi there,
What are the differences between DRV8304S and DRV8323S?
Are they fully p2p compatible? Software compatible?
Our application is a 24V 200W BLDC.
Part Number: DRV8304
Hello,
I know the DRV8304S comes with a charge pump to drive high side MOSFETs and that the VCP pin gives us the charge pump output.
I would like to use that voltage (~ VM+13.5) to drive a different MOSFET (not one of the half bridge…
Part Number: DRV8304 Other Parts Discussed in Thread: DRV8350 , Hello,
I would like to know how much difference the DRV8304 (and DRV8350) can take between the VM that goes to MOSFETs and the VM that goes into other pins of the IC.
I realise that it's recommended…
Part Number: DRV8304 Hi,
I am running my DRV8304S on 1x PWM mode.
The phase waveform is a perfect trapezoid when DIR=0 (INHC input). When DIR=1, the waveform looks like this:
As you can see, there are some stray PWM signals in between the trapezoids…
Part Number: DRV8304 Hi team,
I want to know how AUTOCAL works? After AUtoCAL started, what kind of operation did the op amp perform? (In addition to connecting the input to ground), how do we perform the calibration? (Adjusted the internal resistance…
