Part Number: DRV8317 Other Parts Discussed in Thread: MCF8316C-Q1 Hello everyone,
I am looking for full sytem BLDC Integrates Solutions. I used MP6570 with MP6543H in my old designs, but for now I want to make a new design with TI products. So I need to…
Part Number: DRV8317 Other Parts Discussed in Thread: DRV8316C , DRV8313 Hi all,
For the sensored FOC control of a 12V 2A BLDC motor with Hall sensors, I am currently evaluating the DRV8313 chip. The chip is controlled by an STM32 MCU that drives the PWM…
Part Number: DRV8317 I would like to use the 8317's 3v3 AVDD line to power a microcontroller such that I can just supply motor power to the board without requiring a separate line or regulator for 3v3.
From my understanding of the datasheet, nSLEEP…
Hi Joshue.
thanks for the answers.
1- The thermal calculator is for DRV8317 and not MCT8316, i tried using it but the Vm is limited to 20V.
2- I don't really understand the Advance_lvl and how you suggested to measure it, the Driver doesn't have speed…
Hi Oben,
In terms of full BLDC integrated solution, including integrated control and integrated FETs, the MP6543H is most similar to the MCx8315A device. The MCT8315A includes a trapezoidal commutation algorithm while the MCF8315A integrates a FOC commutation…
Hello Venkatadri,
Please check the below;
https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1326136/drv8317-integrated-control-bldc-drivers-mp6570-with-mp6543h-mps-product-system/5046788#5046788
Am I use " MCF8316C…
Part Number: DRV8316 Other Parts Discussed in Thread: DRV8317 I'm using the DRV8316EVM and have the DRV8316T ( non - SPI device installed).
I'm using the DRV8317EVM with the DRV8317T ( non - SPI device installed).
I'm using a controller that is…
Part Number: LAUNCHXL-F280049C Other Parts Discussed in Thread: DRV8317HEVM , DRV8317 When I use DRV8317HEVM and LAUNCHXL-F280049C to control PMSM by is05_motor_id_coff, unexpected overcurrent occurs. the detail are as below:
in 20KHz PWM case, the current…
Hi MJ,
The DRV8312-69M-KIT and DRV8312-C2-KIT have been discontinued.
Unfortunately this means that you will have to design your own PCB in order to evaluate the DRV8332.
We do have more recently released integrated-FET products which do have EVMs available…
Hi Murthy,
Thank you for posting to the Motor Driver's forum!
The following devices have the same functionality with different pin-out to the DRV8313:
DRV8316: 40-V Max, 8-A peak current
DRV8311: 24-V Max, 5-A peak current
DRV8317: 24-V Max, 5-A peak…
