Hi Davis, Thank you for all the help, we have decided to take another route to tackle this. Will get back to you if we get back to this solution. Thanks again Regards Krishna
Part Number: DRV8328AEVM Hi Team,
As shown in the figure above, in a single-resistor sampling design, what is the difference between the ground of the large electrolytic capacitor being connected to the upper end and the lower end of the sampling resistor…
Hi Dan, I apologize for the delayed response.
Dan said: My launchpad has two different booster pack slots. Does it matter which one this board is plugged into?
Both booster slots should be able to function and connect to the DRV8328EVM, but the second booster…
Part Number: DRV8328AEVM the following defaults should appear when the GUI is connected:
• Direction – Enabled
• PWM Frequency (Hz) – 20000
• MCU Dead Time (ns) – 0
• Acceleration Delay (ms/1% duty cycle) – 21…
Part Number: DRV8328AEVM the following defaults should appear when the GUI is connected:
• Direction – Enabled
• PWM Frequency (Hz) – 20000
• MCU Dead Time (ns) – 0
• Acceleration Delay (ms/1% duty cycle) – 21…
Part Number: DRV8328AEVM Other Parts Discussed in Thread: DRV8328 Hi,
Do you have any application schematic examples of a 3 phase PMSM motor control with the DRV8328A? My question is to review a working schematic and compare it to mine. One concern is…
Part Number: LP-MSPM0G3507 Other Parts Discussed in Thread: DRV8328AEVM , , SYSCONFIG Hi,
Currently using LP-MSPM0G3507+DRV8328AEVM, Using the Keil ARM compiler Is there a demo code that can be run directly? If not, which demo code can be easily modified…
Part Number: LAUNCHXL-F280049C Other Parts Discussed in Thread: DRV8328AEVM We are using LAUNCHXL-F280049C and DRV8328AEVM to drive Sensored BLDC motor. Could you please provide reference code which can be used for this development.
Part Number: LAUNCHXL-F280049C Other Parts Discussed in Thread: DRV8328AEVM , LVSERVOMTR Hello Team,
I am planning to use one LAUNCHXL-F280049C and two DRV8328AEVM boards to drive two hall-based BLDC motors. I also need an angle sensor that can detect the…
Hey Prasanth,
The DRV8328AEVM has 4.5 - 60-V operation, and 30-A peak H-bridge output current.
Here is a link:
https://www.ti.com/tool/DRV8328AEVM?login-check=true
This EVM requires a Launchpad: LAUNCHXL-F280049C as stated in the DRV8328AEVM user…
