Part Number: DRV8329-Q1 Tool/software: hello,
what's the pull up and pull down resistor inside IC for four level input pins? May you double confirm in bench?
Customer find pin34 CSAGAIN is 200K to GND，min 0.82*AVDD=0.82*3.3V=2.706V，but actual results…
Part Number: DRV8329-Q1 Other Parts Discussed in Thread: DRV8329 Tool/software: Hello! After removing the pump capacitor on our side, we found that there was no attenuation at the 95M frequency. Using the near-field antenna of a spectrum analyzer to scan…
Part Number: DRV8329-Q1 Other Parts Discussed in Thread: DRV8329 , DRV8353 Tool/software: Hi,
My costumer requires an information for our process quality control regarding soldering quality of the exposed pad of the driver. To ensure the quality of…
Part Number: DRV8329-Q1 Tool/software: Hi Expert,
Have a nice day.
About DRV8329-Q1, what is the voltage of CPH and CPLPin during working?
Thanks!
Best Regards,
Leo Ma
Part Number: DRV8329-Q1 Tool/software: Dear TI experts,
My customer tests DRV8329AQRGFRQ1 on their own PCB.
While testing they found overshoot on output waveform when startup, while competitor does not have. Please see the waveform below ;
(Left…
Part Number: DRV8329-Q1 Tool/software: Hi Team,
I noticed the high side driver is powered by trickle charge pump voltage in the datasheet block diagram, and it is said the trickle CP voltage is equals to VGVDD. While I found the low side driver is powered…
Part Number: DRV8329-Q1 Tool/software: Hi team,
Would like to check with you if customer don't use DRVOFF pin. Can we leave DRVOFF pin float?
Thanks!
Ethan Wen
Part Number: DRV8329-Q1 Tool/software: Hi team,
My customer wants to use DRV8329-Q1 as their Motor driver.
They want to know if we have any EMC test result that can prove our device has good EMC performance.
Regards,
Peter
Part Number: DRV8329-Q1 Other Parts Discussed in Thread: DRV8329 Tool/software: Hi Team,
Please check the attachment of schematic design and let me know the review result.
DRV8329_Schematic.pdf
Regards,
Part Number: DRV8329-Q1 Tool/software: Hi Team,
My customer is looking for a high-side driver that can drive 3PCS N-channel power MOSFETs (3-channel ) and requires it to support 100% duty cycle operation for a long time in high-power systems (1KW).…
