Part Number: DRV8350H-EVM Hello Mr or Mrs
I am designing a motor driver by using DRV8350H.
I just wonder that is the differences HI-Z and Floating on VDS pin.
Actually I just floated the VDS pin on my board, but there are not mentioned about 'floating…
joe berger said: Question is what tool is best for uploading the ezFET-lite firmware already loaded on the DRV8350H-EVM board on the MSP430F5528?
If you have ordered MSP-FET, I am recommend to use Lite FET-Pro430 GUI software in PC to read the image.
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: MSP430F5529 I am wondering if this drive can be communicated through serial since we can access the parameter through USB communication. I do know that this drive has SPI but I want to see if there…
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: DRV8350 , I believe I have everything set up to properly spin a sensored motor using the EVM board but, I keep getting MCU faults and I do not see why.
I have the Dev board hardware reworked with…
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: DRV8350 I'm trying to use this evaluation board to run a motor, and I want to limit the motor I'm using to draw less than 1.5 A. From reading the ICs datasheet, there seems to be a way to do…
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: DRV8350 , MSP430F5529 Hi,
I just got this DRV8350H-EVM board, connected it to a motor with hall-sensors and managed to control it via the provided GUI
Now that I see it works - I want to control…
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: MSP430F5529 , LP-MSP430FR2476 , DRV8350 , I have developed a new board used to driver BLDC, It mainly used DRV 8350 and MSP430F5529, but I don't use the onboard emulator but use the EZ_FET emulator…
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: DRV8353R , DRV8350 Tool/software: Code Composer Studio Hi,
Single shunt board: https://www.ti.com/tool/DRV8350H-EVM
Can you please tell me if there is any FOC code which I can run on this evaluation…
Scalery,
The board you are showing is not the DRV8350H-EVM, it is some other board. Do you have the schematic of this board?
Likely the MSP430 needs to be programmed.
Regards,
-Adam
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: MSP430F5529 Tool/software: Code Composer Studio hello ,
I have tested the DRV8350H-EVM , and it's good .
My question is about the firmware -- "DRV835X_MSP430F5529_Trapezoidal_Sensored_BLDC…