Part Number: DRV8350S-EVM Other Parts Discussed in Thread: DRV8328 Hi,
We have developed a brushless drive based on DRV8350S-RTV (sorry, we are not using the EVM board, but was the only part I could select in the form).
We are evaluating the design and…
Part Number: DRV8350H-EVM Other Parts Discussed in Thread: MSP430F5529 Hello.
I have designed a new developed board. It can run in the sensored control algorithm. but during the sensorless controled algorithm, It can run several circles but eventually…
Hello,
Reference code can be found in the tool folder. Link below:
https://www.ti.com/tool/DRV8350S-EVM
Regarding your 2nd query, this is more of a tools question, so I will move to the appropriate forum to help you with that.
Regards,
Ryan
Part Number: DRV8350S-EVM Hello,
I'm working with DRV8350S-EVM in Sensored mode for my motor application. The evaluation board was working fine with my setup and I was able to test my motor application.
But I have encountered a problem, the GUI is…
Part Number: DRV8350S-EVM Other Parts Discussed in Thread: LM2596 , DRV8350 we are developing a BLDC motor driver card for power tool for drilling application. motor specifications is 48 VDC 28 amp continuous with hall sensor outputs and peak current is 50…
Part Number: DRV8350S-EVM Other Parts Discussed in Thread: DRV8350
Hi
we could do some idle tests with the DRV8350S-EVM, unfortunately after the last initialization the driver cannot be initialized anymore.
When pressing Enable, I always get the Unknown…
Part Number: DRV8350S-EVM Hi Team,
The customer is experiencing below issue and needs your help.
From the DRV8350S Block, the VCP charge pump and the Gate driver only have VCP connected together.
SHX is only connected to Gate driver, not to VCP charge…
Part Number: DRV8350S-EVM Other Parts Discussed in Thread: DRV8350 , CSD88537ND hello;
these days I try to make some protection for drv8350.Our board use 3 drv8350 to drive 3 BLDC. We have produce 50 PCB .But we found a problen in one board.
When we…
Part Number: DRV8350S-EVM Other Parts Discussed in Thread: MSP430F5529 Hi Team,
DRV8350S EVM is powered on, GHA GLA GHB GLB GHC GLC does not have any PWM signal. Customer would like to know how to calculate the voltage of SHA, SHB, SHC at this time?
Thanks…
