Part Number: DRV8353RS-EVM Hello Team
I am using hall feedback and a 48V PMSM motor. The motor is operating noiselessly and smoothly.
How to operate the motor so that it runs smoothly. What motor parameter settings need to be set up?
Best Regards,
…
Part Number: DRV8353RS-EVM Tool/software: Hi,
When we get the motor spinning, we are able to accelerate fine, but the FAULT LED is now lit up. Reading the registers during spinning results in none of Fault Status & VGS Status 2 registers having a flag…
Part Number: DRV8353RS-EVM Dear TI team ,
I am facing the following issues while DMC level -1 , I have try possible solutions but yet not shorted out
please me to solve it. as I debug the I faced these two fault as well as the default offset parameter…
Part Number: DRV8353RS-EVM
Hello,
I am trying to control a 3 phase bldc motor using the drv8353-evm with in 6x mode. I am using an input voltage of 24V, I can see an output voltage of 34V on the charge pump pin. however, all of the GHx pins are only…
Part Number: DRV8353RS-EVM Hello,
I am working on 24V , BLDC motor application.
We interfacing the F28000157 with DRV8353RS.
Now, I am getting the fault error in the DRV board. The fault LED is continuously glowing .
What I given power to the board Initially…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: LAUNCHXL-F280025C , DRV8353 Hi,
My setup is Launchxl-F280025C + DRV8353RS-evm, used for BLDC motor control.
Since DRV8353RS-EVM has 3.3V regulator, Should I keep JP1,JP2, JP3 of Launchxl-F280025C…
youngtak han said: Regarding InstaSpin-MOTION, should I contact c2000 team? I couldn't find any data related to 8353
InstaSpin-MOTION only supports the dedicated C2000 devices with "M" postfix like F2805xM and F2806xM. You may refer to the links b…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: DRV8353 We are using a DRV8353Rx-EVM board in our PMSM motor controller bring up project. We wish to actuate the DRV chip from our STM32F405 microcontroller hence we have removed the TI board that…
Part Number: DRV8353RS-EVM Hello sir,
I would like to ask , I have the following (DRV board + Launchpad) which is mentioned above as well.
Can you please recommend the suitable motor for the same, even I have 1000W hub motor and trying to spin it as per…
Part Number: DRV8353RS-EVM Other Parts Discussed in Thread: DRV8353 , Hey,
We are working on DRV8353 and TI launchpad F2800157 for BLDC motor application. I configured with Universal Motor Controller code (I followed the universal motor control SDK document…