Part Number: DRV8426E Other Parts Discussed in Thread: DRV8426 Tool/software: Hi Team,
I found that there are not description about 100% supporting in datasheet.
In my understanding, DRV8426 is the charging pump structure, not the bootstrap structure…
Part Number: DRV8426E Hi,
Our customer is considering using Iout=500mA and VVM=12V. The data sheet shows ΔITRIP when VVM=24V, but is it safe to assume the same value when VVM=12V? (When Iout=500mA, ΔITRIP=±10%)
Best Regards,
Nishie
Part Number: DRV8426E Tool/software: Hi,
for my understanding the DRV8426E is regulating the current by turning on and of the voltage of the (stepper) motor. Or more precises, the voltage is switched on as long as the current hasn't reached V_Ref…
Part Number: DRV8426E Hello,
I want to connect one brusded DC motor on the DRV8426x (x=E or P).
what is the best solution?
Do not use the second bridge in the IC or connect the second bridge in parallel with the first?
Best Regards.
Sylvain
Part Number: DRV8426E Hello, I'm considering using the DRV8426P to drive 2 Brushed DC motors. I have questions questions about current limitations IOCP and IREG. In the datasheet, we can see find the following informations: - IOCP is at least 2.5A. -…
Part Number: DRV8426E We use this Motor drivers of Thermal printer.
We would like to know this IC if have any correct usage request , power on/off sequence
for example, when printer cover open, do we need to turn off the power to prevent any problem…
Part Number: DRV8426E In our case (using TI DRV8426ERGER MOTOR DRIVER IC), there is a transportation problem when feeding feed motor, when printing, the paper got stuck and sometimes rolled back.
per check, the waveforms of PB & PB_N output are abnormal…
Part Number: DRV8426E Hi,
Let me check it just in case. Is it correct to recognize that the DRV8426E can also detect the overcurrent generated on the high-side FET side? The background to the question is that when looking at the block diagram, because…
Part Number: DRV8426E Hi support team.
I have a question about full-scale current setting.
Are the notes in the data sheet below a condition to prevent the motor coil from being saturated by the stall current? The right term in equation (1) is understood…
Part Number: DRV8426E Other Parts Discussed in Thread: DRV8876 Hello,
Can I use this driver IC DRV8426P to driver a brushless DC fan?
I want to use this driver to drive a single DC fan utilising Aout1 and Aout2 pins?
What input signals should…
