Part Number: DRV8434EVM Other Parts Discussed in Thread: MCT8329A , DRV8434 Tool/software: Hi person in charge,
Unable to connect to DRV8434EVM. What could be the cause?
Best Regards,
Part Number: DRV8434EVM Other Parts Discussed in Thread: DRV8434 Hello Team,
we are using DRV8434 EVM to run our stepper motor (bipolar) in full step mode. motor is rotating properly and giving required output also.
but there is one query from our customer…
Part Number: DRV8434EVM Hello,
I'm trying to run the GUI locally for the DRV8434EVM kit, but I'm running into all sorts of issues trying to connect to the GUI. I was able to install the GUI (DRV84xx 0.1.4) and the associated run-time (GC 7.4.1) using…
Part Number: DRV8434EVM Other Parts Discussed in Thread: DRV8434 , DRV8462 , DRV8462EVM
Customer is asking if there is a spare GPIO on the DRV8434 Eval Board? Looking at the board schematic, I do not see any spare GPIOs from the MCU connected.
Second question…
Part Number: DRV8434 Other Parts Discussed in Thread: , DRV8424 Hi,
I designed a stepper driver board using a DRV8434 and was having problems so I got a DRV8434EVM ("EVM") to compare. The good news is that the EVM board performs exactly like…
Part Number: DRV8434EVM Other Parts Discussed in Thread: DRV8434 , MSP430F2617 Hi Experts
My customer is requesting a letter of volatility for this EVM.
The letter needs to describe the type of on-board memory if any, or confirm there is no memory on the…
Part Number: DRV8434EVM Other Parts Discussed in Thread: DRV8434 Hi,
I am trying to evaluate the DRV8434 but i am not able to launch the GUI after closing and trying to reopen the GUI. The only way i am able to launch the GUI is go through the install…
Hi Daejin,
What is the error reported if any? Please also refer to this post, https://e2e.ti.com/support/motor-drivers-group/motor-drivers---internal/f/motor-drivers---internal-forum/1346119/drv8889-q1evm-installation-files-for-gui-composer-runtime?tisearch…
Hi Ondra,
I received the reworked DRV8434EVM with a DRV8452 device, https://www.ti.com/tool/DRV8434EVM sooner than I expected. We used a NEMA17 stepper connected to the EVM with 1A IFS, 24 V with this GUI, https://dev.ti.com/gallery/view/MotorDriversBSM…
Carmelo,
This will not work. The device itself on the board does not support STEP/DIR. You will need the following EVM with STEP/DIR device on board.
https://www.ti.com/tool/DRV8434EVM
Regards,
Ryan