Part Number: DRV8889-Q1 Other Parts Discussed in Thread: DRV8434S Hello
We use DRV8889-Q1 drive Stepper，when we use self learning function ，but bit " STL_LRN_OK ",never goes to high.then we set some value for "STL_TH",For example, we will "STL_TH" is…
Hey Christopher,
As long as orders continue to come in (which they will), the part will not be End of Life within the next 10 years. We are supporting 20+ years old parts regularly.
Gotcha, unfortunately we don't have many unipolar-specific motor…
Part Number: DRV8834EVM Other Parts Discussed in Thread: DRV8834 , DRV8434AEVM , DRV8434A , DRV8434S Hello everyone,
could you please tell if DRV8834EVM GUI has any way to evaluate the stall detection feature ?
Thanks in advance.
Part Number: DRV8881 Other Parts Discussed in Thread: DRV8426 , DRV8428 , DRV8434 , DRV8424 Hi team,
can DRV8881P be used in the slow decay mode? now the motor is under subdivision operation with 1.8 step angle and peak current be 2A. the max speed…
Hey Michele,
The PWPR is just the Reel version of the device - TI is phasing out the Tube and Partial-Reel orderables. The device will still come in a reel cut to the size you order, it's the same device as always. Basically just simplifying the package…
Part Number: DRV8462 Other Parts Discussed in Thread: , MSP430F5338 Hi! Following my other post ( https://e2e.ti.com/support/motor-drivers-group/motor-drivers/f/motor-drivers-forum/1315642/drv8434s-spi-example-not-working-with-f280025c-launchpad ) - in…
Hello Zain,
The L298 is not a Texas Instruments device, therefore we cannot comment.
A similar TI device is the DRV8434 , and if you would like to design with that device, we can certainly assist.
https://www.ti.com/product/DRV8434
Regards,
…
Other Parts Discussed in Thread: DRV8434 I have the DRV8434 board,:
The specifics and test intent:
driving the Drv8434 from an external MCU.
Disconnect All Zero Ohm Between On Board MCU and J3 Connector.
Power the board using USB all other…
Hello!
If you check closely, you will find different orderable part numbers.
DRV8434 is STEP/DIR
DRV8434P is PWM
DRV8434E is Phase/Enable
It sounds like you just want the DRV8434 (no "P" or "E" at the end) for STEP/DIR interface.
Holding current…
Part Number: DRV8245H-Q1EVM Other Parts Discussed in Thread: DRV8434 Hello Team:
DRV8245H-Q1EVM
DIAG pin set to LVL1 (Fault reaction in Retry mode), Motor stall, nFAULT LED on, OUT1/OUT2 no power off, The motor is in a stalled state.
DIAG pin set…
