Part Number: DRV8870 Other Parts Discussed in Thread: DRV8770 DR8870 does not have an emergency stop function, the impact force is too large when the motor is stopped in an emergency, the full-bridge circuit used in the past, controlled by the SD foot…
Part Number: DRV8870 Other Parts Discussed in Thread: DRV8770 The DRV drives a brush DC motor with a rated voltage of 24V. The board is powered on. The initial states of IN1 and IN2 provided by MCU are 1 1 and 0 0. When the DRV is powered on, it is measured…
Hi Lucas,
If the application is non-automotive then the following might be good:
DRV8770 data sheet, product information and support | TI.com
DRV8704 data sheet, product information and support | TI.com
Best,
Keerthi
Other Parts Discussed in Thread: DRV8844 , DRV8770 What is the recommended part number for 6-way half axle drive.
1. Working voltage: 8-36v withstand voltage: 60V
2.6 way half axle drive
3. Maximum current 500mA
4 operating temperature -40-125…
Part Number: DRV8870 Other Parts Discussed in Thread: LMP8481 , , DRV8770 , DRV8770EVM The application circuit reference Ti official template, 4-channel PWM waveform is a bit special, which is pulse width modulation kind.
Figure 1
Here is the…
Part Number: DRV8711 Other Parts Discussed in Thread: CSD18543Q3A , , CSD18531Q5A , , DRV8770 Hi support team.
We have received a request from our customer to investigate the cause of the PDF (predriver fault) occurring in the market, albeit infrequently…
Part Number: DRV8705S-Q1EVM Other Parts Discussed in Thread: DRV8705-Q1 , DRV8770 Hello,
I had a hard time with the bootstrap capacitor. The higher the output current is, the bootstrap capacitor will pull a higher current (instant spikes) that causes…
Part Number: CSD86336Q3D Other Parts Discussed in Thread: CSD87334Q3D , DRV8770 I am designing a MMC. For my portion, I am designing the inverter part of the MMC and the gate driver is activated with the PWM signals. Is it okay for a full-bridge gate…
Hey Brian,
Check out the DRV8770 and it's EVM - this is our most basic gate driver and doesn't have the input deglitcher.
I'll let Ryan answer your other questions, as I only recently started working at TI.
Another option to consider is looking…
Hey Kevin,
The best device for DC60V and 5A is the DRV8962 , which is in Preview right now but will be released (active) soon.
We don't have many integrated DC drivers for 60V, so I also recommend looking into using a gate driver instead such as the…
