Part Number: DRV8803 we are planning to use DRV8803 to drive 4 solenoid at a time and solenoid rating is 24V and 100mA. If we are used 4 solenoid to drive at a time and suddenly if i turned of may be 2 or 3 solenoid out of 4 solenoid then will it cause…
Part Number: DRV8803 I only find "Motor speed can be controlled with pulse-width modulation at frequencies from 0 kHz to 100 kHz." in DRV8803's datasheet.
I want to use DRV8803 as a Low-Side Switch in my design, the switching rates needs…
Part Number: DRV8803 Hi TI Teams,
We have some problem with the application of DRV8803. We connect the VM pin to 9V for the power supply, but we want to drive a 5V stepper motor. The following is the schematic:
However, it does not drive the motor to…
Part Number: DRV8803 Other Parts Discussed in Thread: DRV8251 Hi Team,
Do we have appropriate solution can drive below part?
( https://www.magtekcontrol.com/tw/article/tubular-type )
Regards,
Roy
Part Number: DRV8803 Other Parts Discussed in Thread: DRV8860 , DRV8955 Dear experts,
My customer is looking for PLC digital output IO module design that requires 24Vinput and each channel 500mA current ability. When I promote our DRV8803, they mentioned…
Part Number: DRV8803 I have encountered an issue with DRV8803PWPR.
I used 9V to power this IC, but I want to use it to drive a 5V stepper motor.
However, it does not drive the motor to work normally.
The following is the schematic,
The following is the…
Part Number: DRV8803 Hi team,
Here's an issue from the customer may need your help:
The customer measured 14.6V on the INX pin of the chip, and the chip is able to working properly. While according to the manual, the input range for INX is -0.5 to…