Part Number: DRV8872 Tool/software: Hello Team,
can you please help my customer:
We use the DRV8872-Q1 to control a DC motor. It was used as a replacement because the original one from infineon went EOL. During tests I noticed something strange that…
Part Number: DRV8872-Q1 Other Parts Discussed in Thread: DRV8872 Hi,
If the out1 of DRV8872-Q1 is used to drive a high voltage relay, is there any anti-surge protection for the DRV8872-Q1? And what character is about the anti-surge?
Andy
Part Number: DRV8872-Q1 Other Parts Discussed in Thread: DRV8243-Q1 Hi
We are using DRV8872-Q1 in our design. We are using it to control a car mirror tilt horizontal and vertical movements.
When we provide inputs from STM microcontroller to IN pins…
Part Number: DRV8872-Q1 Hi,
I am using DRV8872DDARQ1 for motor actuation, we found that one of the motors we are using for the project includes a 1uF capacitor across the outputs.
In this case, the device attempts to drive the motor though does not…
Part Number: DRV8872-Q1 Tool/software: dear team,
do we have the AEC-Q100-012 Short Circuit Reliability characterization for DRV8872DDARQ1 or any other thermal stress test?
thanks,
Federico
Part Number: DRV8872-Q1 Other Parts Discussed in Thread: DRV8872 MPN: DRV8872DDARQ1
failure rate: 1.4%
. Board level failure mode 板级的失效模式：
Failure mode 1: When MCU setting logic inputs signal IN1=1 and IN2=0, the motor can’t driver forward running…
Part Number: DRV8872-Q1 Other Parts Discussed in Thread: DRV8872 , Dear Sirs,
The Input logic low voltage On datasheet page.5 , As shown below:
VOL(max) of the MCU(MC9S12XET256MAG) we used is 0.8V, As shown below:
1. Look on the values in…
