Part Number: DRV8889-Q1EVM Other Parts Discussed in Thread: MSPM0L1306 Tool/software: I have everything plugged in - I used the GPIO toggle example to update the firmware in the MSPM0L1306 XDS110 - but I keep getting the error:
But that file exists…
Part Number: DRV8889-Q1EVM Tool/software: I am trying out to read register 0x00 from the motor driver.
I am sending out 0x4000 to the driver and getting a response where the first two bits of the data word is not set.
Please see my capture
Part Number: DRV8889-Q1EVM Tool/software: Dear Sirs,
My customer feedback the DRV8889 EVM GUI cannot be execute after install.
What he install is the latest version that get from TI website.
System is Win 8.1K and Win10 64bit and the GUI version…
Part Number: DRV8889-Q1EVM Other Parts Discussed in Thread: DRV8889-Q1 I used the DRV8889-Q1 software to connect the PC and EVM via USB, but the EVM was not recognized.
I found E2E in a similar situation to me, and tried all the solutions written…
Part Number: DRV8889-Q1EVM Other Parts Discussed in Thread: SYSCONFIG , MSPM0L1306 , Tool/software: Pretty much the question. I was rooting around sysconfig for the MSPM0L1306 and noticed that the back channel UART is not used.
What mechanism is used…
Part Number: DRV8889-Q1EVM Hi Team,
The GUI is the latest version 1.1.7 and the configuration is as follows:
Slew Rate:105-V/us;
Full-scale current:0.2;
Torque:31.25%;
All speed set 63 pps;
the software download was completed successfully…
Part Number: DRV8889-Q1EVM Other Parts Discussed in Thread: DRV8889-Q1 hi, A USB connection is made, but the problem is that it is not recognized.
Therefore, please check how to proceed.
Part Number: DRV8889-Q1EVM I have the DVR8889-Q1EVM drive and I am using the GUI program to try to make the my stepper motor work. The following is my set up and the values entered into the program. Although I have it set up and connected to a power supply…
Part Number: DRV8889-Q1EVM Other Parts Discussed in Thread: DRV8889-Q1 hi team,
customer use our EVM, Test with a 12V 120 ohm motor.
GUI configuration is as follows:
The measured waveforms are as follows, with significant periodic clutter that…
Part Number: DRV8889-Q1EVM
it is an inquiry regarding the output current when driving a stepping motor.
I would like to inquire about the current waveform that occurs when driving at low and high speeds under the stepping motor driving conditions…
