Part Number: DS10BR254 Other Parts Discussed in Thread: SN65LVDS104 Tool/software: Hi Experts,
Picture in the datasheet , I'm confused, there is a 1:2 LVDS repeater (two group)?
Our application is only one input source, but we want to have four…
Part Number: DS10BR254 Other Parts Discussed in Thread: DS25BR440 Hi Team,
For DS10BR254 and DS25BR440, what is the maximum capacitance load?
Thank you.
-Mark
Part Number: DS10BR254 Other Parts Discussed in Thread: DDC2256AEVM , , DDC2256A Hi,
Good Day. Is DS10BR254TSQ/NOPB compatible with DDC2256AEVM Evaluation board? As I check the https://www.ti.com/product/DS10BR254 , DDC2256AEVM Evaluation board is under on…
Other Parts Discussed in Thread: DS10BR254 Hi,
One of our customers is interested in the DS10BR254.
Is there an EVM that supports the DS10BR254?
Is there also a full data sheet and a user manual for the DS10BR254?
Thanks
Rani
Hi Uchikoshi-san,
Unfortunately we do not have a dedicated 1:4 LVDS mux. A device like DS10BR254 or DS25BR204 may work. There devices are 1:4 LVDS repeaters that can power-down there outputs via control pins.
Hi Cem,
Sorry for the delay and thanks for the clarification. This will be a bit difficult and rather complicated to implement with what we have.
One idea:
Serializer: DS92LV3221: This Channel Link II serializer will serialize up to 32 parallel inputs…
Part Number: ADS5407 Other Parts Discussed in Thread: DS10BR254 , In my project, i have to synchronize 64 ads5407s on 16 platforms with K7(xilinx) fpga, and now i have such problems as follow: i have SYNC signal through a lvds buffer (DS10BR254) to link…
Other Parts Discussed in Thread: LMH0002 , LMH0046 , LMH0044 , DS10BR254 Dear Sir
we have plan to do SDI extender and connect way as below:
SDI signal --->LMH0044---->LMH0046---->DS10BR254----> LMH0002*4
May we remove LMH0046 in our application…
James
I would look at the DS92CK16 which is a 'BLVDS' clock buffer. BLVDS is a technology developed by National Semiconductor before the MLVDS standard was released, which is quite similar (B is for Bus, M is for Multipoint).
The DS92CK16 is a…
Other Parts Discussed in Thread: DS25MB100 Hey,
I'm looking for HDMI 2.0 splitter (1 : 2). Please pay attention that I am not need a switch.
I need it for my design so I should be a component with QFN/TSSOP/SMT package or something similar.
Thank's…
