Search tips
Showing 96 results View by: Thread Post Sort by

  • RE: DS15EA101: Simulation models for ADS

    Hi Naoki-san, See this E2E FAQ: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/1498993/faq-lmh1297-manually-adjusting-cable-eq Best regards, Nick

  • DS15EA101: What does the VIN range on the datasheet mean?

    TI Thinks Resolved
    Part Number: DS15EA101 Tool/software: Hi, I want to check the electrical specifications in the DS15EA101 datasheet. Is the 950mVp-p VIN listed in the data sheet the differential amplitude? Or is it the single-ended amplitude? Does it refer to the AC…

  • DS15EA101: Need CTE value for DS15EA101SQE/NOPB and DS15BA101SDE/NOPB

    Part Number: DS15EA101 Hi experts Can someone provide the CTE values for the 2 parts below? DS15EA101SQE/NOPB DS15BA101SDE/NOPB Thanks for your help! Best regards, Jim B
    • Answered

  • DS15BA101: DS15BA101 and DS15EA101 are used for SPI signal

    Resolved
    Part Number: DS15BA101 Other Parts Discussed in Thread: DS15EA101 , Hello team, My customer has a question about DS15BA101 and DS15EA101. They are considering to use them after converting differential signal from SPI signal to expand with long cable. In this…
    • Resolved
    • Answered

  • DS25BR100: Can be used instead of DS15BA010+DS15EA101 for long reach application?

    Resolved
    Part Number: DS25BR100 Other Parts Discussed in Thread: DS92LV18 , DS15EA101 , DS15BA101 , Hi team, I'm considering 300Mbps LVDS transmission using DS92LV18. For long reach application, AN-1909 is provided as an application note. and introducing DS15BA101…
    • Resolved

  • DS15EA101: Output noise

    TI Thinks Resolved
    Part Number: DS15EA101 Other Parts Discussed in Thread: DS15BA101 Hi Team, My customer connects the DS15EA101 with the signal from the CMOS image sensor via AC coupling. They equalize the DS15EA101 and input it to the FPGA with AC coupling. Some noise…

  • DS15EA101: Common mode rejection ratio

    TI Thinks Resolved
    Part Number: DS15EA101 Hi team, Good day. What is the common-mode rejection ratio if the circuit is configured as shown in Figure 3. Cable Extender Chipset Connection Diagram for 100Ω Differential Cables? Regards, Carlo
    • Answered

  • DS15EA101: Alternative parts

    Resolved
    Part Number: DS15EA101 Other Parts Discussed in Thread: LMH0074 , DS15BA101 Dear TI, Is the DS15EA101 a possible alternative to the LMH0074 (assuming the BYPASS & MUTEref are not used) when used between 150 Mbps & 540 Mbps. The datasheet refers…
    • Resolved
    • Answered

  • DS15EA101: ds15ea101 Input termination resistor position

    Resolved
    Part Number: DS15EA101 I have a question about input termination resistor.. Which position is better in front of capacitor or In front of IC? See below diagram. For your reference, DS15EA101 datasheet describes the diagram that the position is in…
    • Resolved

  • DS15EA101: Usage record with FPGA

    TI Thinks Resolved
    Part Number: DS15EA101 Hi Team, Has this device been used with Intel's "cyclone V GX"? I would like to know that the Rx port can be used with 1.5V-PCML without any problems. Have you evaluated it at TI Lab? Best Regards, Kenji

Didn't find what you are looking for? Post a new question.