Part Number: DS250DF410 Other Parts Discussed in Thread: DS100DF410 Hi Team, We are designing a 10G link between two separate boards. Board 1 has Marvell's cavium processor CN8350 SOC and Board2 has TI-6638K2k SOC. The 10G link is implemented over xfi interface…
Part Number: DS250DF410 Other Parts Discussed in Thread: DS560DF810 , DS280DF810 DS250DF410: Are below 4 optical modules supported?
100G: 100G of C2M, CAUI-4 (baud rate: 25.78125GBd) and GAUI-4 (baud rate: 26.5625GBd)?
50G: 50G of C2M, LAUI-2 (baud rate…
Part Number: DS250DF410 Other Parts Discussed in Thread: USB2ANY , , Elaborating on Glen's question, do we need to disable KR training on the backplane along with disabling auto-negotiation for Ethernet function for the retimer to work in 25G mode
Part Number: DS250DF410 Hi Expert,
How to set DS250DF410 CTLE boost?
BTW, what is the difference of retimer, redriver and repeater?
Thanks
Best regards,
David
Part Number: DS250DF410 Hello:
My customer uses the port of ds250df410 and needs to support the port rate of 1.25g. Look at the description of datasheet and need to disable CDR mode. customer can't find the corresponding operation on datasheet and programming…
Hi,
You may request download access to GUI via link below. The EEPROM part number per your message looks good to use.
https://www.ti.com/licreg/docs/swlicexportcontrol.tsp?form_id=202045&prod_no=DS250DF410-DESIGN&ref_url=sva_sds
Thanks,
Rodrigo…
Part Number: DS250DF410 Other Parts Discussed in Thread: TUSB1104 , TUSB1146 Dear Team,
Please recommend Type-C USB 3.2 G2 (10Gbps) Re-timer or Re-driver.
Many Thanks,
Jimmy
Part Number: DS250DF410 Hello:
When the customer debugged the DS250DF410, the DS250DF410 programming guide document was mentioned in the datasheet, but it was not found on the official website. Thank you for your help.
Part Number: DS250DF410 Other Parts Discussed in Thread: DS250DF810 , DS280DF810 ,
Is the difference between the DS280DF810 and the DS250DF810 only the rate? 1. Can DS250DF810 be used in 100G CR scenarios? (DAC cable 100G out of the panel) 2. DS250DF410 application…
Part Number: DS250DF410 Hi Support Team,
the DS250DF410 has a clock in --> Buffer(Inverter?) --> and a clockout.
Is it possible to combine these inputs and outputs with a crystal for a pierce oscillator?
Or is it better to have a single endet XO…