Part Number: DS25MB200 Other Parts Discussed in Thread: DS42BR400 Hello support team,
My customer want to get the IBIS-AMI model for the DS25MB200. Could you explain how the customer can get such model?
Best regards,
Izumi Maruyama
Part Number: DS25MB200 Hi Team,
Does below tSM (6ns) refer to the maximum settling time when switching different channels, like switch A channel from B channel? Or are there other delays we should also add to? Thanks.
B&R
Stanley
Part Number: DS25MB200 Hi team,
My customer wants to DS25MB200 in series with 1000base-x mac opto module, whether it will influence the sync clock recover? Thanks.
Other Parts Discussed in Thread: DS25MB200 , DS15MB200 Dears,
Does anyone can help to explain, why DS25MB200 cannot use for lower data rate such as 155Mbps?
I know that DS25MB200 spec. is for 0.6~2.5Gbps signal.
However, as normal thinking, IC…
Other Parts Discussed in Thread: DS25MB200 , LMH0356 Is someone able to share the IBIS model for the DS25MB200. It is not available on the web.
Thanks
Jamie
Part Number: DP83869HM Other Parts Discussed in Thread: DP83867E , DS25MB100 , DP83869 , DS25MB200 Thank you for your help.
Please tell me about the bridge mode of DP83869HM. DP83869HM has two bridge modes: RGMII-to-SGMII and SGMII-to-RGMII. Is it possible…
Part Number: DS25MB100 Other Parts Discussed in Thread: DS40MB200 , DS42MB100 , SN65LVCP40 , DS25MB200 Thank you for your help.
I would like to create a loopback path for the SGMII signal (1.25Gbps). The following device groups can be selected as candidates…
Hi Taner,
I recommend you should check the signal level requirements for SGMII TX and RX and make sure the part you choose is able to meet the requirements.
The DS15MB200 is LVDS mux buffer. Another similar part is DS25MB200, which is a CML mux-buffer…
Hello,
The DS25MB100 is the device that best fits your minimum specifications, as it is an LVDS compatible 2:1/1:2 Mux/Buffer for up to 2.5 Gbps data rates. The DS25MB100 has a single mux, and we also have the DS25MB200 which is a dual mux/buffer. …
