Search tips
Showing 38 results View by: Thread Post Sort by

  • DS32ELX0124, DS32ELX0421

    Other Parts Discussed in Thread: DS32ELX0124 , DS32ELX0421 Hi, One of our customers is interested in the DS32ELX0124 + DS32ELX0421. Is there an evm for these parts? Thanks, Rani

  • RE: LVDS serdes selection

    Hi Thomas, Yes, DS32ELX0421 could work out as well. I may need to route you to a different team for DS32ELX0421 Best Regards, Charley Cai
    • Answered

  • DS32ELX0124: About the register setting of EQ

    Resolved
    Part Number: DS32ELX0124 Other Parts Discussed in Thread: DS32ELX0421 , Hi team, My customer is evaluating communication between DS32ELX0421 and DS32ELX0124 on a prototype now. Please let me ask you two questions about the register setting for EQ0 just…
    • Resolved
    • Answered

  • DS32EL0421 output impedance 75 ohm single ended

    Resolved
    Other Parts Discussed in Thread: DS32EL0421 , DS32ELX0421 Hello, According to the datasheet "the DS32EL0421 and DS32ELX0421 have internal termination resistors". Has this chip an internal terminations circuits (coil parallel to resistor and capacitor…
    • Resolved
    • Answered

  • DS32ELX0124: Limitation in the number of daisy chained devices ?

    Resolved
    Part Number: DS32ELX0124 Other Parts Discussed in Thread: DS32ELX0421 We have selected DS32ELX0124 for use in a large signage project, where we will daisy chaining multiple led panels with this ic (with CAT6 cable in between). Then I recently read in…
    • Resolved

  • RE: DS32EL0421: Connecting DS32EL0421 to DS32ELX0124 error

    Hi, There should not be any issues in switching between the DS32ELX0421 to the DS32EL0421. Have you measured the signal / eye diagram at the input to the DS32ELX0124 and determine if there are any differences in jitter? Are you able to provide a summary…
    • Answered

  • RE: DS32ELX0124: About EQ boost control setting

    Resolved
    Hi Hashimoto-san, Thank you very much for your reply. When my customer evaluated the communication between DS32ELX0421 and DS32ELX0124 on his prototype,the setting Low(x10) was able to communicate with a longer cable than the setting Mid(0x01). From…

  • DS32EL0124: Can I use this chip to deserialise 1000BASE-X coming from a Ethernet to Optical media converter

    Part Number: DS32EL0124 Other Parts Discussed in Thread: DS32ELX0124 , DS32EL0421 , DS32ELX0421 Dear TI, I have a design based around Xilinx Spartan3A-DSP, DS32EL0124 and DS32EL4210. In its current form the hardware/firmware implements an sFPDP protocol over…
    • Answered

  • RE: Simulation model for LMH0340 and LMH0341

    Resolved
    Hi ttd, The DS32ELX0421 and DS32ELX0124 models also provide the model for the CML serialized bit stream in addition to the LVDS interface modeling. Thanks, Michael
    • Answered

  • RE: DS32EL0421 : IBIS Model

    Resolved
    Hi alpha, Attached is the IBIS model for the DS32ELX0421, a similar part with an extra redundant high-speed output channel. From a simulation standpoint, this should not make a difference. DS32ELX0421.ibs Thanks, Michael

Didn't find what you are looking for? Post a new question.