Part Number: DS90UB913A-CXEVM Other Parts Discussed in Thread: ALP , USB2ANY Hi
I am getting following message when I run ALP.
"The connected <Unknown device> has a firmware version (0.0.0.0) that is not supported by this software.
A firmware…
Part Number: DS90UB913A-CXEVM Other Parts Discussed in Thread: DS90UB914A-CXEVM , , USB2ANY Hello,
We are trying to create a pass through output for our camera system.
i. From image sensor -> Deserializer DS90UB914A-CXEVM through the coaxial power…
Part Number: DS90UB913A-CXEVM Hi champs,
in the DS90UBUB913/4A EVMs, there are a series of coupled inductors (DLW21SN261XQ2) that all show as DNP. Can you explain why they were included, and if the design was ever tested with them populated? If so, I…
Other Parts Discussed in Thread: DS90UB913A-CXEVM , DS90UB914A-CXEVM I would like to confirm VDDIO setting for DS90UB913A-CXEVM & DS90UB914A-CXEVM.
1. Can we use 1.8V VDDIO for these board? The default setting for these board is 3.3V VDDIO and I don…
Other Parts Discussed in Thread: DS90UB914A-CXEVM , DS90UB913A-CXEVM , ALP I would like to confrim the method of the setting for DS90UB913A-CXEVM & DS90UB914A-CXEVM by ALP.
The customer set the board and ALP, but they and I don't know how to send the…
Part Number: DS90UB913A-CXEVM
Tool/software: Linux
hi alls,
I met a knotty problem, and I have no idea.
the develop environment is: ADAS + 964 + 913 + sensor(ov5640). using Operation with Pixel Clock from Imager as Reference Clock, (24MHZ…
Other Parts Discussed in Thread: DS90UB913A-CXEVM , DS90UB914A-CXEVM Dear Technical Supprot Team,
I have a question about DS90UB913A-CXEVM & DS90UB914A-CXEVM.
This EVM has pull-up and pull-down for pallarel interface such as DINx , ROUTx.
http://www…
Other Parts Discussed in Thread: DS90UB913A-CXEVM I would like to conifrm the external oscillator of DS90UB913A-CXEVM.
In the schematic, there is CY25418, but there is not it on the EVM.
And in the BOM, there is the oscillator of 100MHz.
I have questions…
Other Parts Discussed in Thread: DS90UB913A-CXEVM Is there an off the shelf module that can be connected to the DS90UB913A-CXEVM LVCMOS input header to transmit the video data to test out the FPD-Link III interface?
Other Parts Discussed in Thread: DS90UB914A-CXEVM , OMAP3530 , DS90UB913A-CXEVM We are using DS90UB913A-CXEVM and DS90UB914A-CXEVM boards. We are not able to communicate to the deserializer through I2C. We are using an OMAP3530 and MAX3370 bidirectional…
