Part Number: DS90UB925Q-Q1 Hello Team,
We would like to check the following setup, DS90UB925->926->TFT (480x240 ). Please find the TFT specs as an attachment.
Also we would like to know any other LVDS based or DSI based or HDMI based SER/DESER support…
Part Number: DS90UB925Q-Q1 Hi Expert,
I see in 925 0x64 bit7:4 that 0000 is reserved. I see in 949 datasheet it means checkerboard pattern. Is there any possible way for 925 to generate checkerboard also? Thanks.
BR,
Elec Cheng
Part Number: DS90UB925Q-Q1 Hi Team
Are there any products with pattern function in DS90UB925Q-Q1?
At present, customers want to find a higher specification TX_IC, which can define the function of the test pattern by themselves. thank you
Part Number: DS90UB925Q-Q1 Other Parts Discussed in Thread: DS90UB940-Q1 We have two UB925 from two boards. Is there a deserializer that can aggregate inputs from them? We also considered using two UB940, then use another IC to aggregate outputs from them…
Part Number: DS90UB925Q-Q1 Hi Team,
We meet flicker issue when using 925-926, and see lock lost when flicking. We'd like to check the jitter at 925 PCLK input side.
Here comes some questions:
1. Jitter tolerance:
1) In datasheet, minimum tolerance…
Part Number: DS90UB940-Q1 According to the datasheet, it seems that only the primary input pins can be used when set to backward compatible mode to work with DS90UB925Q. Just want to double check if it's the case. Thank you.
Part Number: DS90UB925Q-Q1 Other Parts Discussed in Thread: ALP , Hi Team
The following parameters are the Timming that customer want to generate using the Pattern Generator inside the DS90UB925Q1.
If we want to set DS90UB925Q1 through ALP. What(Where…
Part Number: DS90UB925Q-Q1 Hi, TI Support Team
As shown in the attached video below, we have received inquiries about the video breakage problem.
It is composed as shown in the BLOCK Diagram below, and please check whether there is a possibility of…
Part Number: DS90UB925Q-Q1 Hi Team
There is a good new we DIN DS90UB925 & DS90UB926 at new project ! And end equipment is HUD!
First test the TX/RX will lost of LOCK....
1.I tried to use I2C to read the register here. After downloading the slave…