Part Number: TPS546D24A Other Parts Discussed in Thread: TPS546D24 Hello,
My customer requested TI's review of the TPS546D24ARVF design.
Please review their design below to see if there are any problems.
TPS546D24_N.pdf
Thank you.
JH
Quentin said: Thank you for the feedback, then I'll go with +0.3V : VBAT_OK = 3.3V & VBAT_OK_HYST = 3.6V
That should be good.
Quentin said: Based on datasheet, during data transfer : NRF24L01 = 12mA & STM32 =10mA. With a confortable safety margin…
Part Number: LM5117
Hello,
My customer requested TI's review of the LM5117 design.
Please review their design below to see if there are any problems.
Thank you.
JH
Part Number: LM5169 Hello,
My customer requested TI's review of the LM5169 design.
Please review their design below to see if there are any problems.
SCH_LM5169.pdf
Thank you.
JH
Part Number: LM76005 Other Parts Discussed in Thread: INA238 , Hello,
My customer requested TI's review of the INA238 design.
Please review their design below to see if there are any problems.
SCH_LM76005.pdf
Thank you.
JH
Part Number: INA238 Hello,
My customer requested TI's review of the INA238 design.
Please review their design below to see if there are any problems.
SCH_INA238.pdf
Thank you.
JH
Hello,
I reviewed the schematic and placement of the components seem correct. There is an RCD clamp on the primary switch node and SR across SR FET. You know have to evaluate the circuit to see if adjustments are needed. Application note sluaac5 should…