Part Number: F29H85X-SOM-EVM Other Parts Discussed in Thread: TMDSHSECDOCK , SYSCONFIG Tool/software: Cannot seem to get CAN working on the F29H85X-SOM-EVM evaluation board with a TMDSHSECDOCK attached to a NXP CAN-FD shield.
I have tried the examples…
Youcef,
Thank you for your flexibility. Please see below.
youcef bouchebaba said: (1) The CPU1_SRAM_DATA is set to CDATA? How to changed to LD ? The same question for CPU2_SRAM_DATA is set to LDATA.
I've relayed the feedback to the SW team, and…
Part Number: F29H85X-SOM-EVM Hi,
I am currently working on the security features of the F29H85x controller. When will the F29 TIFS SDK be released, and can I access any cryptographic accelerators with the main CPU while the device is in HS-FS mode?…
BORIS GLADSTEIN said: when I try to launch a debug session
There are different ways to start a debug session. Here I assume you are right clicking on the project and selecting "Debug Project"? If so, CCS will start a debug session using the default…
Part Number: F29H85X-SOM-EVM Tool/software: Hi guys,
there is i had tested flash-model-_128_program example code test.
and after test done. reset and try run one more time, it show like this.
=============================================
C29xx_CPU1…
Part Number: F29H85X-SOM-EVM Tool/software: How to correctly create a new section through modify .cmd file?
The selected part in this picture is the section i created recently,but it doesn't generate successfully in the .map file after i built my project…
Part Number: F29H85X-SOM-EVM Tool/software: I am using the F29H85X controlSOM evaluation board.
I want to use TI's emulator Spectrum Digital XDS560V2 STM USB Emulator for emulation and debugging.
I connected the Spectrum Digital XDS560V2 STM USB emulator…
Part Number: F29H85X-SOM-EVM Could you please guide me on how to use the UART Flash Programmer or CAN Flash Programmer available in the F29H85x SDK ? Additionally, is there any recorded video or tutorial available for reference?
Thanks in advance and…
Part Number: F29H85X-SOM-EVM I am using an eCAP unit to measure rising and falling edges from an external signal that is triggered via a 300KHz EPWM on CPU3. The capture unit is ECAP1 and PWM EPWM1. EPWM1 generates a sync out pulse which is used as an…
