Part Number: BQ27546-G1 Other Parts Discussed in Thread: GPCRA0 , GAUGEPARCAL , GPCCHEM Hi,
from https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1113669/bq27546-g1-soc-jump-during-relax-discharge-relax-test
this…
Part Number: BQ40Z80 Other Parts Discussed in Thread: GPCRA0 , Hi, I’m trying to use GPCRA0 to generate gg file for bq40z80 gauge. The results have Qmax set to the actual mAh rating of the battery. With scaling factor set, I’m assuming Qmax should scale…
Hi Anvin,
Sorry for the delay.
1) SOH is the ratio between predicted FCC/Design Capacity. What "battery capacity usage" are you referring to?
3) Predicted FCC is the FCC at room temperature and SOH current rate which is the highest discharge…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: GPCRA0 Dear All:
I 'm sorry to say the same issue happen again in the GPCRa0 test. I don't know what happen in my test, in the last 3 years , I have been following this process and…
Part Number: BQ27520-G4 Other Parts Discussed in Thread: GPCRA0 Hi Expert,
After done the GPCRA0, I can get the GPC_report.txt. It shows "Ra values could not be updated in a GG file due to format issue. Please update manually".
Should I key in…
Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCRB , GPCRA0 , Hi TI experts,
I have a BQ40Z50-R2 pack that operate temperature is from -20C to 60C. As we know, TI has GPCRB and GPCRA0 good tools for user. How to combine GPCRB and GPCRA0 in my…
Hello,
If the Ra table is updating, then there should be no issue manually changing the Learned Status value from 5 to 6.
Below is a link to the GPCRA0 tool, which can help you confirm is the Ra table values are correct.
https://www.ti.com/tool/GPCRA…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: GPCRB , GPCCHEM I get attached errors when submitting attached GPCRA and GPCRB files.
Battery is lead acid so using C/20 discharge rate. Could this be source of error? Any ideas?
https://www.power…