Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCRB , GPCRA0
Tool/software:
Hello,
I want to do the GPCRB. I export gg.csv, it is 0E of the Update Status in this gg.csv.
When I get TI report (gg_out.csv / chemdat12_IDxxxx) from TI GPCRB…
Part Number: BQ27421-G1 Other Parts Discussed in Thread: GPCRB , BQSTUDIO , BQ25600 , Tool/software: Hi team,
Customer try to use BQ27421 with the chemical ID get from GPCRB tool.
Their battery best match Chem ID 366, and they would like to get the…
Part Number: BQ40Z50-R1 Other Parts Discussed in Thread: GPCRB , GPCCHEM Tool/software: GPCRB impedance track failure.The upload file as follws.
Please tell me how to do this. The chem id can't support the temperature of -40℃?
Thanks!
Different…
Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCRB I looked at some old posts that suggested the GPCRB tool be used if the BQ40Z50-R2 is operating over a large temperature range. Our pack is being discharged over a temperature range of -20C…
Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCRB , BQSTUDIO Hello，
1. Is GPCRB before or after learning?
2. Is battery pack or battery cell recommended for GPCRB?
3. In my opinion, the data is to configure the chip first, and then…
Part Number: BQ27Z561-R2 Other Parts Discussed in Thread: GPCRB
Hi team,
1. According to the guidance on the official website, I need to collect VIT data before doing GPCRB. is there any requirement for the srec file to be used at this time? Was it…
Part Number: BQ34Z100-G1 Other Parts Discussed in Thread: GPCRB Hi
I have a query need your help.
GPCRB report feedback: Ra0_ch, mOhm : 119 This firmware is not explicitly supporting Ra0_ch, FCC drop could occur at low
Attached the log data and…
Part Number: BQ40Z50-R2 Other Parts Discussed in Thread: GPCRB Dear Sir
Recently, our company has a new project to do low-temperature ID optimization, and we found that the GPCRB link cannot be accessed. Do you know what the situation is? When can…
Part Number: BQ4050 Other Parts Discussed in Thread: GPCRB , BQ34Z100-G1 Hi
I have a query need your help.
GPCRB report feedback: Ra0_ch, mOhm : 119 This firmware is not explicitly supporting Ra0_ch, FCC drop could occur at low
Attached the log…
Part Number: BQ28Z610EVM-532 Other Parts Discussed in Thread: GPCRB , BQSTUDIO Tool/software: Last week, I performed the GPCRB procedure to optimize gauging at cold temperature. However, the gauge had done some learning with the learning cycle previously…
