Hi Venkatadri,
We don't have HALL part number. Since it is integrated to motor. only supply voltage mentioned in datasheet.
Also as you said we have given the hall sensor supply 5V and pulled up with 3v3. It is working in EVM also. But my question…
Hi Anna,
If you want to connect the Hall Sensors, I believe they should be connected to available GPIO pins on your MCU. The DRV8316xEVM board comes with Hall sensor connection ports for each of the phases of the motor and connects directly with the…
Thank you for the explanation.
I found out that the halt problem came from motor hall sensor circuit power shortage.
I changed hall power selection jumper in EVM to EXT from AVDD and it works. It seems the motor hall sensor circuit gets much power…
You may take a look at the lab for the C2000 devices in motor control SDK. The universal motor control lab is available in the current MCSDK, which can support a set of hardware kits and control algorithms for BLDC/PMSM drive. The kits include LAUNCHXL…
Ryder,
We have a ref design that uses the LDC1314 inductive sensor for angle estimation: https://www.ti.com/tool/TIDA-00508 . It is oriented towards 1deg absolute accuracy and 0.1deg resolution, but it could serve as useful starting point. A higher…
Part Number: DRV8353RS-EVM Hello Team
I am using hall feedback and a 48V PMSM motor. The motor is operating noiselessly and smoothly.
How to operate the motor so that it runs smoothly. What motor parameter settings need to be set up?
Best Regards…
Part Number: TMS320F280039C Other Parts Discussed in Thread: C2000WARE , DRV8350 Hello,
We are planning to use the TMS320F280039C and DRV8353H for a new BLDC motor control project and have a couple of other questions related to circuit design
…
Part Number: DRV8350F Other Parts Discussed in Thread: UCC3626 , DRV8350 , DRV8350R
Tool/software:
We have a motor controller design using UCC3626 in 4 quad mode. To power the external N-FETs we are planning on using DRV8350.
1: are there any known…
Part Number: FDC1004 Tool/software:
Hello,
In reference to the following forums:
FDC1004: Different capacitance value measured when CAPDAC change
FDC1004: CAPDAC Anomaly when value changes from 16 to 17
I have been trouble shooting the same…
Part Number: DRV5057
For the second example, we will emulate a mechanical slide by movement similar to what can be found in analog dimming switches. Advantages of this implementation include a PWM output signal, and no mechanically wearing items. The…
