Part Number: HD3SS460 Hello,
Here is a question I want to hear your opinions.
For my understanding, MUX is a switch, if one path is switch on, I can use multimeter measure the resistance between in and out, it should be very low impedance. But if this…
Bogey
The TUSB564/1064 is the part with the HD3SS460 mux plus the re-driver function. However, with the addition of the re-driver function, it is NOT pin-to-pin compatible with HD3SS460.
Thanks
David
Part Number: HD3SS460 Dear all,
For HD3SS460, for the SSRX,SSTX pin, when the DC block cap should be used and what value should be used?
In datasheet, here is Figure 5/6 with 500nF cap and 100kohm resistor, what is the purpose of the 100kohm resistor…
Part Number: TPS65987D Other Parts Discussed in Thread: HD3SS460 , TUSB1064 , Hello,
I found this thread about using the HD3SS460 vs TUSB1064 with TPS65987D: https://e2e.ti.com/support/interface/f/138/t/805919?tisearch=e2e-sitesearch&keymatch=tps65987…
Part Number: TPS65987D Other Parts Discussed in Thread: HD3SS460 , , TPS65987 Hi,
Some questions about TPS65987D+HD3SS460 application.
1>, Which GPIOs of TPS65987 are recommended to use as control signals of POL, AMSEL and EN of HD3SS460?
2>, There are…
Part Number: HD3SS460 Hello
My customer is looking to implement a mux to switch HDMI and USB to an USB Type C port.
Could i check if HD3SS460 is suitable for this requirement?
Is there any reference solution that can support this switching?
INg
Part Number: HD3SS460 Other Parts Discussed in Thread: HD3SS213 Hi Team, My customer is considering to use HD3SS460 for receiving display port1.2a signal from USB Type-C cable. In addition, he also considers to put HD3SS213 for switching DisplayPort1.2a…
Part Number: HD3SS460 Other Parts Discussed in Thread: TDP142 Hi Sir
May HD3SS460 just use in Type C application?
As my understanding, we just follow Table 1, then we also can use to be DP switch. am i right?
…