Part Number: HDC2080EVM Other Parts Discussed in Thread: HDC2080 , HDC2022 Tool/software: One question on HDC2080 and dc2022.
From the datasheets of the above 2 sensors on temperature calculation,
HDC2080 says:
while HDC2022 says:
Between 40…
Part Number: HDC2080EVM Dear Sir/Madam
Can i know if the board layout file in the page 42 of the evk user guide is the exact dimension of the kit? if not, can you help to share the full dimension of the eval kit?
It will be good if you can share the…
Part Number: HDC2080EVM Hello team,
Recently I have tested the HDC2080EVM, using the GUI. However, after a couple of tests, I have found out that the sensor humidity range is between 0% and around 80%. Once the humidity is above 80% the sensor measured…
Part Number: HDC2080EVM Hello,
Recently I have started using the HDC2080EMV. I am trying to measure Humidity and Temperature of a IPC placed in climate chamber. I am using the GUI to stream the data, but I noticed that the Temperature measurements are…
Dear Lawrence -
Please see page 43 of the HDC2080EVM user guide. Layout images for topside and bottomside routing is there. You would only want to copy end of the board (on the left side) - further, more examples and recommendations can be found here…
Part Number: HDC2080EVM Greetings,
I installed " Sensing Solutions EVM GUI Tool v1.9.4 (Rev. E) " on windows 10 and plugged in the HDC2080EVM usb dongle but the guy shows "not connected"
Device manager shows a device under Ports (COM & LPT) as EVM…
Part Number: HDC2080EVM Other Parts Discussed in Thread: HDC2080 ,
I'd like to test \ verify the HDC2080EVM on a PC and then plant it in a raspberry pi. I have limited serial over USB experience and would like to know if it is feasible or if there are…
Part Number: HDC2080EVM Other Parts Discussed in Thread: HDC2080 Team,
Where is R12 on the HDC2080EVM?
We are switching addresses from 0x40 to 0x41 via a resistor as outlined in section 2.2 of this document (attached).
The I2C address of the HDC2080…
