Part Number: HDC3020 Derars:
During long-term storage, the customer observed that the HDC3020 requires a prolonged period to recover its normal humidity readings. To accelerate this recovery process, the customer intends to utilize the HDC3020 ’s integrated…
Part Number: HDC3020 Dear Texas Instruments Team,
I am currently planning to substitute the temperature and humidity sensor used in our product with the HDC3020. However, I have noticed that this device is currently unavailable for purchase through…
Part Number: HDC3020
Hello experts,
I am using an HDC3020 sensor and would like to use its integrated heater functionality to remove condensation. However, I have some concerns.
The datasheet mentions that the heater must be enabled and disabled…
Part Number: HDC3020 The HDC3020's operating range is -40 to +125°C. What temperature data can be read when the temperature drops below -40°C or exceeds +125°C?
Does it fluctuate from -43, -42, -41, -40, ... , 125, 126, 127, 128, etc. until the HDC3020…
Part Number: HDC3020 Dear TI Engineers,
I am planning to mass-produce a temperature and humidity sensors based on HDC3020:
www.ti.com/.../HDC3020
May I get the Gerber files mentioned in its user guide for my own production?
www.ti.com/.../snau265…
Part Number: HDC3020 Other Parts Discussed in Thread: HDC3022 Hello fellow engineers
I looked at "Optimizing Placement and Routing for Humidity Sensors" (1.png) but didn't understand it, so I have a question.
I'm considering an exterior design with…
Part Number: HDC3020-Q1 Other Parts Discussed in Thread: HDC3020EVM , This post is regarding my previous inquiry: https://e2e.ti.com/support/sensors-group/sensors/f/sensors-forum/1624627/hdc3020-q1-significant-self-heating-observed-on-both-custom-pcb…
Part Number: HDC3020 Hi,
For a battery operated application we want to wake up the µC from sleep only if the alarm output form the auto-measure mode of the HDC3020 signals a temperature change of 0.2°C compared to the last measurement.
The alarm threshold…
Part Number: HDC3020 Hi, We have been using the HDC3020 sensor in our project and this project is in Production. In few units, we are facing 104% as Humidity value. We have verified the raw data and it is also inaccurate as FCE1. This issue is not permanent…
