Search tips
Showing 2,547 results View by: Thread Post Sort by
    Answered

  • RE: TPS8802EVM: How to EVM interface with MSPM0L1306 launchpad using dual smoke ray example test

    Resolved
    Pratik, I have sent a complete list for configuration of the EVM/Launchpad to match the demo board setup described in the app note previously referenced. For completeness, please find my answers to your questions below. As we are discussing this topic…

  • DUAL-DIYAMP-EVM: Sallen-key active filter SCH

    TI Thinks Resolved
    Part Number: DUAL-DIYAMP-EVM Tool/software: Hi team, In our DIYAMP series EVM design, there is Sallen-key filter as below in our DIYAMP/SOT23/SC70 EVM, the sch is as below: However, in the correct learning, the band pass circuit sallen- key filter should…

  • AWR2243: When using MMWCAS-RF-EVM, you can choose the dual chip AWR2243 cascading method. Can the dual chip cascading mode be the main chip plus any one slave chip？

    TI Thinks Resolved
    Part Number: AWR2243 Other Parts Discussed in Thread: MMWCAS-RF-EVM Tool/software: When using MMWCAS-RF-EVM, you can choose the dual chip AWR2243 cascading method. Can the dual chip cascading mode be the main chip plus any one slave chip？

  • AWR2243: Does the MMWCAS-RF-EVM using 4-chip AWR2243 cascade only support 4-chip cascade and not support dual chip cascade mode？

    TI Thinks Resolved
    Part Number: AWR2243 Other Parts Discussed in Thread: MMWCAS-RF-EVM Tool/software: I changed the quad chip cascade configuration to dual chip cascade configuration in the \ Scripts \ Cascade \ Cascade_Configuration_Sasic script file (as shown in Figure…
    • Answered

  • RE: DLPC900: No heartbeat on the primary DLPC900 on a Dual-DLPC900 EVM board - part 2

    Resolved
    Hello Aishwarya For the record, the problem was that a series termination resistor from one of the clock distribution chips had popped off. Once we fixed this, we were able to turn the corner and get this working correctly. We can call this issue resolved…

  • DUAL-DIYAMP-EVM: Which package can be assembled to DUAL-DIYAMP-EVM?

    TI Thinks Resolved
    Part Number: DUAL-DIYAMP-EVM Other Parts Discussed in Thread: TLV9052 Hello guys, One of my customers is considering using TLV9052IDGK (VSSOP8pin) for their new products and they want to evaluate the device using DUAL-DIYAMP-EVM. They have the following…

  • SK-AM62: How to config SK-AM62 E3A evm board to only use dual cores?

    TI Thinks Resolved
    Part Number: SK-AM62 SK-AM62 E3A evm board has four Arm Cortex-A53. We'd like to evaluate the dual core performance. How can we configure it?

  • DLPC900: No heartbeat on the primary DLPC900 on a Dual-DLPC900 EVM board

    Part Number: DLPC900 Hello, we have encountered the following problem with our DLP LightCrafter Dual DLPC900 Evaluation Module. When the board powers up, the heartbeat LED associated with the primary DLPC900 chip does not flash. The EVM board does not…
    • Answered

  • ADC12DJ5200RF: Inquiry Regarding 'Device Functional Modes' in ADC12DJ5200RF

    Resolved
    Part Number: ADC12DJ5200RF Tool/software: Dear TI Support Team, I have a few questions regarding the 'Device Functional Modes' section in the datasheet for the ADC12DJ5200RF. [Question 1] According to the datasheet, using INA in single-channel…
    • Resolved
    • Answered

  • UCC14240-Q1: RLIM calculation for EVM and max load current using the DESIGN CALCULATOR TOOL dual output

    Resolved
    Part Number: UCC14240-Q1 Other Parts Discussed in Thread: UCC5871-Q1 Hi, Q#1: I'm trying to match the UCC14240-Q1 DESIGN CALCULATOR TOOL calculations (dual output) with the existing UCC14240 EVM components. In the spreadsheet, for IQ_DRIVER_VDD & IQ_DRIVER_VEE…
    • Resolved

Didn't find what you are looking for? Post a new question.