Part Number: INA186-Q1 Other Parts Discussed in Thread: INA186 , INA240 Hello, when we were using the INA186A2QDCKRQ1 with a gain of 50, we found that there was a significant deviation between its input and output results. VPWR is 13.51V, the coil resistance…
Part Number: INA186-Q1 Other Parts Discussed in Thread: INA240 Hi Team,
The customer is using the INA186A3QDCKRQ1 in a 12V automotive power supply system.
The TVS on the power line will clamp negative pulses to -40V, while the negative voltage of…
Part Number: INA186-Q1 Hi expert,
Please help to provide the test method of Offset drift (0.5uV/℃). The test result is 50mV from customer. So they want to refer TI's test method. Thanks.
Best Regards,
Ryker
Part Number: INA186-Q1
Panasonic has requested dielectric constant data.
The reason for requiring this data is to consider the potential impact of PCN component changes
on insulation properties and radiation characteristics,and to verify the difference…
Part Number: INA186-Q1 Other Parts Discussed in Thread: INA186 Tool/software: Hi expert,
My customer (CosMX) wants to use INA186-Q1 as low-side current sensing in Auto 48V BMS project. Is there any design point we need to take care in this application…
Part Number: INA186-Q1 Hi team,
How much pulse duration do we have to refer to ESD or absmax rating?
For example, for testing the device, to attach probe in each pin may have dv/dt pulse stress to the IC. For example, they will be ~100ps, ~1ns,…
Part Number: INA186-Q1 Tool/software: Hello team,
My customer want to confirm below 3 things. Can you check please?
1. In datasheet, offset voltage is Vos:+/-50uV(Max.). Is this maximum value in -40C ~ +125C?
2. In datasheet, Gain erro is Eg:+/…
Part Number: INA186-Q1 Tool/software: Hi TI team, question regarding current sensor, we have using it in following schematic. VCC = 1.76V VSNS_REF = 0.256V Resistor R3987 10k disconnected IN- shorted with IN+ between 7 and 8 pins. In this setup I should…
