Part Number: INA214 Hi Team
Let me ask about treatment of REF pin.
Could we open or connect to GND throgh the cpacitor about REF Pin show in below figure?
best regards
TATSU
Part Number: INA214 Other Parts Discussed in Thread: INA216 , , INA281 , INA280 , INA181 Hi Team
My customer is using INA214A as the 12V output current sense Ap. they find the response time delay is different when they do dynamic load test. you can…
Part Number: INA214-Q1 Other Parts Discussed in Thread: INA228 , INA214 Dear team,
My customer feedbacks that 100uV offset voltage is too large for them. They hope the offset voltage can be pV or nV level. Do we have such devices?
Thanks & Best Regards…
Part Number: INA214-Q1 Other Parts Discussed in Thread: INA240 hi team,
now my customer want to use INA214-Q1 to sense the current of motor, The motor speed is based on 100rpm, current sampler scheme, phase current frequency is approximately 14Hz…
Part Number: INA214-Q1 Other Parts Discussed in Thread: INA214 Dear team, I'm using the INA214-Q1, in the configuration below, for measure the output current of a 0,85V power supply with 2A of nominal current. I made some tests with a Rshunt=7mohm and…
Part Number: INA214-Q1 Other Parts Discussed in Thread: INA214 Hi team,
In INA214 ds, the maximum capacitive load is 1nF. if customer use RC at output (100ohm 0.01uF), do you see any issue?
Another question is how to calculate the bandwidth in their…
Part Number: INA214-Q1 If the V+ voltage is 15V + (+/-500mV) ripple. For example, what is the impact on gain errors? Because there is only the influence of Gain vs Temp in the specification, there is no influence of Gain vs V+.
BR, Gary
Part Number: INA214-Q1 Hi expert,
My customer find some issue about Ref pin floating or give it a 3.5kohm will see the output signal have 10khz abnormal noise as this pic
their original circuit connect is Ref pin and Gnd pin connect together then…
Part Number: INA214-Q1 TEXAS INSTRUMENTS - PCN : 20231220001.2 - Effective Date : 2024/06/20 - PCN Types : Fabrication site change / Qualification/Country of Origin/New Subcon (FAB)
About the "CS2305251: PPAP20231227-028858", Here I create the first…
Part Number: INA214 Hi Support team
The following is the measured ΔV of the sense current Resistor and the INA214 inputΔV It is found that if the resistance of the input filter is changed from 100ohm -> 20 ohm, the loss of the input voltage ΔV will…
